Product Description
Universal Number 3 Emblem, Polished 304 Stainless Stick-On (SGR#3)
SGR#3 is a number three cut from polished stainless steel, listed by QAA as a universal decal that fits all vehicles. Like the other digit emblems, its approximate size is 3.25" x 2.25". People use single digits for race and club numbers, anniversaries, or to finish a figure started with other digits.
Specifications from the listing
One piece. Made in the USA. 26 gauge 304 stainless, polished to a mirror shine. Mounted with 3M automotive-grade acrylic foam tape; QAA states the tape will hold for a lifetime without causing any damage to the vehicle's surface. Installs over the existing surface.
Where the size note leaves off
"Approximately 3.25"x2.25"" is all the listing says. It doesn't state height versus width, or the stroke thickness. The product photos show the shape. A paper cut-out at that size, taped in place, is the easiest way to judge it on your own vehicle.
Not the Texas emblem
The linked two-piece Texas emblem, SGR11002, carries a second note reading Number "3." That line doesn't belong to this emblem. SGR11002 is a Texas emblem, not a number three. Call Quality Automotive Trims at 877-752-3811 if you'd like it confirmed.
Assembling a number
Each listing covers one digit. SGR#0, the number one, SGR#2 and SGR#4 are linked here. QAA also lists five through nine as separate number emblems that aren't linked to this page. Count repeated digits and order one listing per digit.
Choosing a location
Look for a smooth, flat panel. Rigid steel doesn't wrap around tight curves or bridge seams. Painted metal and glossy trim give tape the most contact.
Preparation that pays off
Wash the spot, dry it, and wipe with isopropyl alcohol. Don't touch the cleaned area with your fingers; skin oil weakens adhesion.
Line and spacing
Mark a level line with painter's tape. If you're setting several digits, space them with a ruler and mark each position before peeling any liners.
Set and press
Peel, place, then press hard across the whole emblem for several seconds. A warm surface helps. Leave it a day before washing.
Removal
The listing doesn't describe removal. If you think you may want to move the number later, choose its location with that in mind and ask us for advice.
Other linked emblems
Two-piece universal emblems such as SGR11003 400HP, SGR11004 20", SGR11007 NO NY and SGR11009 Football Helmet are linked, along with SGR45370's "500 Limited" decal. Check each listing; several carry notes that don't match their titles.
Care
Mild soap, soft cloth, dry afterward. Non-abrasive polish if needed.
Thinking about the whole figure
A three on its own works as a class or team number. If it's part of a longer figure, sketch the complete number on paper at full size, using about 3.25" by 2.25" per digit plus your chosen gap, and hold the sketch up to the panel. You'll see straight away whether the full row fits the space you have and whether it looks balanced.
Why polished steel
Stainless digits don't fade or curl at the edges, and they clean up with plain soap and water.
Logo SGR#3, UPC 691821353736; dial 877-752-3811.
SGR#3 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | SGR#3 |
| UPC | 691821353736 |
| Part type | Number "3" |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Universal Decal, approximately 3.25"x2.25" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | Universal Decal |
Fitment: SGR#3
| Vehicle | Years | Body style |
|---|---|---|
| Universal Decal | Fits ALL |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Universal Decal
- SGR45370: 2-piece "500 Limited" decal
- SGR#0: 1-piece Number "0"
- SGR#1: 1-piece Number "1"
- SGR#2: 1-piece Number "2"
- SGR#4: 1-piece Number "4"
- SGR11001: 2-piece Trucker Girl
- SGR11002: 2-piece Texas
- SGR11003: 2-piece Graphic/Logo/Emblem
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Number "3"
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: SGR#3 Number "3"
What size is SGR#3?
Approximately 3.25" x 2.25".
Is SGR11002 Texas a number three?
No. Its second note says Number "3" by mistake; it's a Texas emblem.
Does it fit all vehicles?
QAA lists it as universal, fits all. Choose a smooth, flat spot.
How does it install?
3M automotive-grade acrylic foam tape, directly over the existing surface.
How many pieces?
One.
