Product Description
Stainless Number Eight Emblem, Polished 304, Universal Fit (SGR#8)
SGR#8 is a single polished stainless steel number eight from QAA, listed as a universal decal that fits all vehicles. The listing puts its size at approximately 3.25" x 2.25", the same as QAA's other digit emblems.
Not the NO NY emblem
One catalog quirk is worth knowing: the two-piece "NO NY" universal emblem QAA catalogs carries a second note reading Number "8." That line belongs to a different listing. It isn't linked to this listing and isn't a number eight. If you want an eight, SGR#8 is the listing.
Build and mounting
Made in the USA from high-quality polished 26 gauge 304 stainless steel, cut to perfection and polished to a mirror shine. 3M automotive-grade acrylic foam tape; QAA states it will hold for a lifetime without causing any damage to the vehicle's surface. Installs over the existing surface.
Compatibility line
It reads "Universal Decal N/A, Fits ALL." The N/A looks like a placeholder.
Linked digits
SGR#5, SGR#6, SGR#7 and SGR#9. QAA's zero-through-four number emblems are separate listings not linked here. One listing is one digit; order two for a double eight.
Size check
Approximate dimensions only, with no height stated. Tape up a paper rectangle about 3.25" by 2.25" where you'd like it and look at the effect from a distance.
Where to stick it
Smooth, flat paint or glossy trim. A rigid digit won't hug tight curves or bridge seams, and tape needs full contact.
Prep
Wash, dry, isopropyl alcohol wipe. Make sure the surface is fully dry and free of wax.
Orientation
An eight can look much the same either way up, but don't assume. Check the product photos, mark the top on the liner, and place it accordingly.
Application
Use a painter's-tape baseline, place the digit with the liner on to check spacing, then peel and press firmly across both loops. Avoid cold-weather installs and skip washing for a day.
Number ideas
Race numbers, jersey numbers, or part of an anniversary or year when combined with QAA's other digits.
Why metal
Polished stainless stays bright with washing and won't fade like printed numbers.
Care
Mild soap and a soft cloth. Gentle metal polish for haze; nothing abrasive.
Get in touch
Questions about the NO NY note, sizing or layout? Call Quality Automotive Trims at 877-752-3811.
Thinking through placement
A number is usually read from behind or from the side, so stand where people will see it. A digit that looks centered from up close can look off from across a parking lot. Tape a paper template in place, walk back a few car lengths, and look again. Move it until it looks right from the distance that matters, then mark the spot. It's also worth checking that nothing moving, such as a door edge or a hinge, will brush across the emblem.
Spare tip
Install the eight last if it's in the middle of a row; it's easier to center against neighbors already in place.
Questions about decal SGR#8 (UPC 691821390601)? Quality Automotive Trims picks up at 877-752-3811.
SGR#8 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | SGR#8 |
| UPC | 691821390601 |
| Part type | Number "8" |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Universal Decal, approximately 3.25"x2.25" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | Universal Decal N/A |
Fitment: SGR#8
| Vehicle | Years | Body style |
|---|---|---|
| Universal Decal N/A | Fits ALL |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Universal Decal N/A
- SGR#5: 1-piece Number "5"
- SGR#6: 1-piece Number "6"
- SGR#7: 1-piece Number "7"
- SGR#9: 1-piece Number "9"
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Number "8"
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: SGR#8 Number "8"
Is the NO NY emblem a number eight?
No. Its second note says Number "8" by mistake. SGR#8 is the eight.
What size is SGR#8?
Approximately 3.25" x 2.25".
Does it fit all vehicles?
The listing says Fits ALL. Choose a smooth, flat spot.
How does it attach?
3M automotive-grade acrylic foam tape.
How many pieces?
One.
