Product Description
Universal Stainless Steel Number 7 Decal, Stick-On, ~3.25" x 2.25" (SGR#7)
SGR#7 is a polished stainless steel number seven sold as a single universal emblem. QAA lists it to fit all vehicles and gives its size as approximately 3.25" x 2.25". Its straight strokes make it one of the easier digits to align, as long as you start with a level reference.
Quick facts
One piece. Made in the USA. High-quality polished 26 gauge 304 stainless steel. 3M automotive-grade acrylic foam tape, which QAA states will hold for a lifetime without causing any damage to the vehicle's surface. Goes directly over the existing surface.
The fitment line
"Universal Decal N/A, Fits ALL." The N/A looks like a placeholder that wasn't removed; the meaningful part is that the emblem isn't tied to any one vehicle.
Lucky sevens
Seven turns up on race cars, team gear and anything meant to bring luck. If you want two sevens side by side, order two of this listing; each one is a single digit.
Linked numbers
SGR#5, SGR#6, SGR#8 and SGR#9. The zero-through-four digits are separate listings that aren't linked to this group.
Picturing it
With no height or stroke width given, the best preview is a paper template at about 3.25" x 2.25" taped where you want the seven. View it from a few steps away and from another car's distance.
Choosing the panel
Flat and smooth works best. Tape needs full contact, so skip textured trim, seams and sharp bends.
Keep it level
The top bar of a seven shows any tilt. Lay a painter's-tape guide parallel to a straight body line, rest the digit against it, and check from directly behind or beside the vehicle before you peel.
Prep the paint
Wash, dry, wipe with isopropyl alcohol and wait for it to evaporate. Clean paint is the single biggest factor in a strong bond.
Apply
Peel the liner, line up the top bar with your guide, and press firmly from one end to the other. Warm weather or a heated garage helps. Wait a day to wash.
Why polished stainless
It holds its bright finish with ordinary washing and won't fade the way printed decals can.
Upkeep
Mild soap, soft cloth, then dry. A gentle metal polish takes care of water spots; abrasive pads will scratch.
Questions
Call Quality Automotive Trims at 877-752-3811 with any question about the size, the fitment note or placement.
Laying out several digits
For a longer number, set every emblem on the guide line with its liner still on, then step back and look. Even gaps matter more than exact measurements; the eye notices an uneven gap much faster than an off-center row. Once you're happy, mark each digit's position with a small strip of painter's tape at its edge, remove all but the first, and apply them one at a time. Recheck the guide before each peel, since a strip of masking tape can shift slightly as you work.
One universal emblem under SGR#7 and UPC 691821270910. Ring Quality Automotive Trims on 877-752-3811.
SGR#7 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | SGR#7 |
| UPC | 691821270910 |
| Part type | Number "7" |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Universal Decal, approximately 3.25"x2.25" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | Universal Decal N/A |
Fitment: SGR#7
| Vehicle | Years | Body style |
|---|---|---|
| Universal Decal N/A | Fits ALL |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Universal Decal N/A
- SGR#5: 1-piece Number "5"
- SGR#6: 1-piece Number "6"
- SGR#8: 1-piece Number "8"
- SGR#9: 1-piece Number "9"
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Number "7"
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: SGR#7 Number "7"
How big is SGR#7?
Approximately 3.25" x 2.25".
Does "N/A" mean it doesn't fit my car?
No; the listing says Fits ALL. The N/A means it isn't cut for one vehicle.
What holds it on?
3M automotive-grade acrylic foam tape.
How many sevens come in one order?
One. Order two listings for two sevens.
Is it made in the USA?
Yes, from polished 26 gauge 304 stainless steel.
