Product Description
SGR#6 Polished Stainless Number Six, Universal Emblem, Approx. 3.25" x 2.25"
SGR#6 is QAA's universal number six: a single polished stainless digit that mounts with tape, listed to fit all vehicles. At approximately 3.25" x 2.25", it matches the other digit emblems so mixed numbers line up evenly.
Six or nine?
Flip a six upside down and it can look like a nine. When you peel the liner, double-check that the digit is upright before it touches the surface, because the tape grabs immediately and repositioning is difficult. A tiny pencil mark on the liner marking "top" helps.
From the listing
Made in the USA. High-quality polished 26 gauge 304 stainless steel, "Cut to perfection & Polished to a Mirror Shine." One piece. Mounted with 3M automotive-grade acrylic foam tape that QAA states will hold for a lifetime without causing any damage to the surface. Installs directly over the existing surface.
Fitment wording
The record says "Universal Decal N/A, Fits ALL." The N/A means the emblem isn't cut for a particular vehicle.
The linked digits
SGR#5, SGR#7, SGR#8 and SGR#9 are linked here. QAA's zero-through-four emblems are their own listings and aren't linked to this one. Each listing is a single digit, so count repeats in your number when ordering.
Sizing it up
The note doesn't specify which dimension is the height. Make a paper template at about 3.25" by 2.25" and tape it up both ways to see which looks right on your panel. The photos show the six's outline.
Location
A smooth, flat surface is essential. Avoid seams, textured plastic and anywhere the emblem would bridge a curve.
Prepare
Wash, dry, and wipe with isopropyl alcohol. Let it evaporate before you peel the liner.
Spacing with other digits
Run a level painter's-tape baseline and set every digit on it with liners still attached. Measure gaps so they're consistent, then apply one digit at a time.
Bonding
Press hard across the whole digit for several seconds. Install when the panel is warm; cold slows the bond. Give it a day before washing.
Number ideas
Team and race numbers, a birthday or anniversary figure, or the last digit of a year that means something to you.
Polished steel upkeep
Mild soap and a soft cloth. Dry it to avoid spots; a non-abrasive metal polish restores haze.
Help with a layout
If you're planning a longer number and want a second opinion on spacing, send a photo to Quality Automotive Trims and call 877-752-3811. We're glad to help.
What makes a metal digit different
Vinyl numbers are thin and flat. A stainless digit has a little thickness and a mirror face, so it catches light and reads clearly from across a lot. It also stays bright with ordinary washing, without the fading or edge curl that printed decals can develop. That's the appeal of a metal number on a vehicle you plan to keep.
Spare liners
Keep the liner after peeling; it's a handy reference for the outline if you ever plan a second identical digit.
For logo emblem SGR#6, with UPC 691821414888, Quality Automotive Trims takes calls at 877-752-3811.
SGR#6 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | SGR#6 |
| UPC | 691821414888 |
| Part type | Number "6" |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Universal Decal, approximately 3.25"x2.25" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | Universal Decal N/A |
Fitment: SGR#6
| Vehicle | Years | Body style |
|---|---|---|
| Universal Decal N/A | Fits ALL |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Universal Decal N/A
- SGR#5: 1-piece Number "5"
- SGR#7: 1-piece Number "7"
- SGR#8: 1-piece Number "8"
- SGR#9: 1-piece Number "9"
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Number "6"
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: SGR#6 Number "6"
Can SGR#6 be used as a nine?
It's listed as Number "6." SGR#9 is the nine; check orientation before you press it on.
What size is it?
Approximately 3.25" x 2.25".
Does it fit any vehicle?
The listing says Fits ALL. Use a smooth, flat surface.
How many pieces?
One.
Is it stainless?
Yes, polished 26 gauge 304 stainless steel, made in the USA.
