Product Description
Number 9 Stainless Steel Decal, Universal Stick-On Emblem (SGR#9)
SGR#9 is a number nine in polished stainless steel, one piece, listed by QAA as a universal decal that fits all vehicles. Its approximate size is 3.25" x 2.25". It completes the linked five-through-nine group of digit emblems.
Upright, not a six
A nine turned over reads as a six. Before peeling, confirm which way is up from the product photos and put a pencil mark on the liner. Once the tape touches paint it grips hard, so get the orientation right the first time.
What it is
High-quality polished 26 gauge 304 stainless steel, made in the USA. It mounts with 3M automotive-grade acrylic foam tape that QAA states will hold for a lifetime without causing any damage to the vehicle's surface, directly over the existing surface.
"N/A" in the fitment
The record reads "Universal Decal N/A, Fits ALL." Treat the N/A as a leftover placeholder; the emblem is universal.
Other linked digits
SGR#5, SGR#6, SGR#7 and SGR#8. The zero-through-four number emblems are separate listings and not linked to this one. Each listing is one digit.
Quantity planning
Write down the exact number you want, count how many nines it has, and order that many of SGR#9. Do the same for the other digits.
Preview
Cut a template at about 3.25" by 2.25" and tape it on the panel. The listing doesn't say which side is height, so try both.
Choosing where
Pick smooth, flat paint with space around the emblem. Avoid seams, textured plastic and curves the rigid steel can't follow.
Getting the surface ready
Soap and water, dry, then isopropyl alcohol on a clean cloth. Don't touch the cleaned area afterward.
Lining up
Use a painter's-tape baseline and dry-fit with the liner on. If it's part of a row, measure gaps between digits so they're even.
Setting it
Peel and place on your mark, then press firmly across the whole face. Work on a warm surface, and leave washing for a day.
Ideas
A race or jersey number, a lucky digit, or the end of a year that matters to you.
Why stainless
Polished steel holds its shine with washing and won't fade like printed numbers.
Cleaning
Mild soap, soft cloth, dry. Non-abrasive polish if it hazes.
Questions
Call Quality Automotive Trims at 877-752-3811.
Before you peel
Stand back and look at your template or dry-fitted digit from where people will actually see it, usually from behind or the side at a few car lengths. A placement that is centered up close can look off from across a parking lot. Move it until it reads well from that distance. Also check that nothing that opens or moves, such as a door edge or hinge, will rub across the emblem once it's applied.
Working in rows
When the nine sits within a longer number, apply digits from the center outward so the row stays balanced around its midpoint.
The SGR#9 logo emblem carries UPC 691821441693. Call Quality Automotive Trims at 877-752-3811 with questions.
SGR#9 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | SGR#9 |
| UPC | 691821441693 |
| Part type | Number "9" |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Universal Decal, approximately 3.25"x2.25" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | Universal Decal N/A |
Fitment: SGR#9
| Vehicle | Years | Body style |
|---|---|---|
| Universal Decal N/A | Fits ALL |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Universal Decal N/A
- SGR#5: 1-piece Number "5"
- SGR#6: 1-piece Number "6"
- SGR#7: 1-piece Number "7"
- SGR#8: 1-piece Number "8"
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Number "9"
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: SGR#9 Number "9"
How do I avoid putting SGR#9 on upside down?
Check the photos for which way is up and mark the liner before peeling.
What size is it?
Approximately 3.25" x 2.25".
Does it fit my vehicle?
The listing says Fits ALL. Use a smooth, flat surface.
Which digits are linked?
SGR#5 through SGR#8.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
