Product Description
Hummer H3 Stainless "HUMMER" Letter Inserts, 6 Pieces, 2006-2009 (HV46307)
Six letters spell HUMMER, and HV46307 is six pieces: a set of polished stainless letter graphics QAA notes as "HUMMER" Inserts. It is listed for the Hummer H3 4-door SUV, model years 2006 through 2009, and made in the USA from 26-gauge 304 stainless steel with a mirror finish.
Inserts for existing lettering
The note calls these inserts, meaning they're made to go into or onto lettering already on the H3 rather than to supply lettering where none exists. The catalog doesn't say where on the H3 that lettering is, so check the product photos to see the location, and compare them with your own truck. If the lettering in that spot has been removed, painted over or replaced, call before ordering, because the inserts are cut to match the factory letters. When phoning 877-752-3811 about your H3, quote HV46307.
Lining up six letters
Individual letters are where patience pays off most. A slightly tilted letter is easy to spot in a word, so plan the job carefully:
- Clean the lettering area with soap and water, then rubbing alcohol, and let it dry.
- Lay the six inserts out on a towel in order, spelling the word.
- Test each one in its spot with the liner still on.
- Install one letter at a time, working left to right.
- Press firmly over every part of each letter, including the corners.
Look at the finished word from a few steps back before you put your tools away, and give the tape time to bond before washing. The Installation tab has notes on temperature.
Mounting
Every insert fixes over the existing surface with 3M automotive-grade acrylic foam tape. No drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
The "H3" emblem too
The H3 sheet also lists HV46308, a two-piece set of letter graphics noted "H3" Emblem. The catalog doesn't say whether the emblem and the HUMMER lettering sit near each other, so check both listings' photos. If you order both, doing them in one session saves repeating the cleaning and setup, since the prep and the method are exactly the same for each.
Other parts for the H3
Thirteen parts are cross-listed, including HV46306, a one-piece grille accent noted "Z-Grille Cover," HV46302, a two-piece hood accent, and HV46311, a two-piece rear window trim accent. Check each listing's photos and notes.
About the finish
Polished 304 stainless keeps its shine without a plating layer, so the letters won't flake. 26 gauge is a thin sheet, keeping the inserts close to the surface. Wash with mild soap and water and dry with a soft towel; skip abrasive pads, which can catch the letter edges.
Fitment
One row: Hummer H3, 4-door SUV, 2006-2009, with no trim exclusions. Check the year, and count six letters when the box comes.
For the six H3 emblems, phone 877-752-3811 and quote HV46307; the UPC is on the Specs tab.
HV46307 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | HV46307 |
| UPC | 691821404001 |
| Part type | Letter Graphics |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | "HUMMER" Inserts |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2009 Hummer H3 |
Fitment: HV46307
| Vehicle | Years | Body style |
|---|---|---|
| Hummer H3 | 2006-2009 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2009 Hummer H3
- HV46301: 4-piece Rocker Panel Trim, Lower Kit
- HV46302: 2-piece Hood Accent Trim
- HV46303: 9-piece Hood Vent Trim
- HV46304: 4-piece Body Molding Insert Trim Kit
- HV46305: 2-piece Marker Light Trim
- HV46306: 1-piece Grille Accent
- HV46308: 2-piece Letter Graphics
- HV46309: 6-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Letter Graphics
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: HV46307 Letter Graphics
What is HV46307?
A six-piece set of polished stainless "HUMMER" letter inserts for the 2006-2009 Hummer H3 4-door SUV.
Where do the letters go?
The catalog doesn't say. The product photos show the location, or call 877-752-3811.
Do I need existing lettering on the truck?
The note calls them inserts. If your lettering has been removed or changed, call before ordering.
How do they attach?
With 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Is there a matching emblem?
HV46308 is a two-piece "H3" emblem listed for the same SUV.
