Product Description
Nissan Altima 2007-2009 Lower Grille Surround with Vent, 1-Piece Stainless (SG27550)
SG27550 is a single polished stainless accent for the Nissan Altima sedan, 2007 through 2009, described in the record as "Lower Surround with Vent." The note points to the lower front rather than the main upper grille; the photos show exactly where.
Reading the note
"Lower Surround with Vent" is the only placement detail in the data. The record doesn't explain the wording further, show the outline, or give any measurements. The product photos are the way to confirm it matches your car. If they leave a question, Quality Automotive Trims is at 877-752-3811.
Which Altima
4-door sedan, 2007, 2008 and 2009. The record lists no trim exclusions. Other Altima body styles aren't on this listing.
Material
For the Altima, the accent is one piece of 26-gauge 304 stainless with a mirror polish, made in the USA, fastened with 3M automotive-grade acrylic foam tape onto the existing surface. QAA says the tape lasts a lifetime without damaging the Nissan.
Linked parts
None are linked in the data. Call us if you'd like to know what else is cataloged for this Altima.
What a surround is
A surround is trim that outlines an opening. On the lower front, it gives a bright border without changing the opening itself.
Lower front, lots of grime
This area sits in the spray zone. Wash it carefully, use a soft brush in any openings, rinse, and let it dry completely. Then clean the mounting band with a solvent that flashes off without residue, turning the cloth until it stops picking up dirt. A creeper or kneeling pad makes the job easier on your back.
Placement
Hold the surround against the opening, liner on, and compare with the photos. A surround should look centered with an even margin all the way around, so check both sides. Mark a couple of reference points with painter's tape.
Applying
Peel the liner a section at a time as you press the piece into place, starting at one end. Once it's all down, go around the whole surround with firm pressure, especially at corners and ends. Mild, dry weather out of direct sun gives the best result. See the Installation tab.
Before ordering
On a car from these years, check the lower front for scrapes, touch-up paint or a replacement bumper cover. The surround is cataloged for the factory part, and the tape needs a sound surface, so send a photo if you're unsure.
Why polished 304
No plating means nothing to flake off. If it dulls, a light polish restores it.
Care
Skip washing for a few days. Then mild soap and a soft cloth, and keep pressure-washer nozzles away from the edges. The bumper and opening underneath stay exactly as they were.
A good first trim job
One piece, no tools, and a clear note in the record make this a manageable afternoon, as long as you take the cleaning and dry-fit seriously.
Altima grille accent SG27550 (UPC 757565510177): ring Quality Automotive Trims at 877-752-3811.
SG27550 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | SG27550 |
| UPC | 757565510177 |
| Part type | Front Grille Accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Lower Surround with Vent |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2009 Nissan Altima |
Fitment: SG27550
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Altima | 2007-2009 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Front Grille Accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: SG27550 Front Grille Accent Trim
Which Altima years does SG27550 fit?
2007 through 2009, 4-door sedan.
Is this for the main grille?
The record notes "Lower Surround with Vent." Check the photos for exact placement.
How many pieces?
One.
Are dimensions given?
No. Call 877-752-3811 for help.
How does it install?
3M automotive-grade acrylic foam tape, onto the Altima's current surface.
