Product Description
Lincoln MKC 2015-2018 Grille Logo Surround, 1-Piece Polished Stainless (SG55640)
On the Lincoln MKC, the emblem is the centerpiece of the grille, and SG55640 is a single polished stainless accent noted "Logo Surround" to frame it. The listing covers the MKC 4-door SUV from 2015 through 2018. QAA describes this single piece as a logo surround for the 2015-2018 MKC.
What a logo surround does
It outlines the emblem with a thin bright border, leaving the badge itself uncovered. The record doesn't give the surround's size or describe its exact shape, so compare the product photos with your MKC's grille before ordering. Quality Automotive Trims can help at 877-752-3811.
MKC years
2015, 2016, 2017 and 2018, 4-door SUV, with no trim exclusions. Other Lincoln models aren't on this listing; QAA catalogs separate logo surrounds for some of them.
The steel
One piece of 26-gauge 304 stainless steel with a mirror polish, made in the USA. 3M automotive-grade acrylic foam tape is used, and the surround mounts over the existing surface. The emblem stays in place. QAA states the tape will hold for a lifetime without causing damage to the vehicle surface.
A rear companion
The only linked part is LB55640, a license bar above the plate, listed at 1.375 inches. A logo surround up front and a license bar at the back give the MKC bright touches at both ends. Check LB55640's listing for its finish.
Centering on the emblem
A surround only looks right if the gap around the badge is even. With the liner on, set the piece around the logo and look at the margin at the top, bottom and both sides. Take a photo on your phone and zoom in; small differences show up clearly that way.
Detail cleaning
Emblems collect polish residue in their edges. Wash and dry the grille, then clean the landing area with a solvent that leaves no film. A cotton swab gets into the tight spots near the badge. Keep going until a fresh swab comes away clean.
Pressing it on
Because a surround has curves, peel the liner slowly and press as you go, keeping the margin even. When the whole piece is down, run a fingertip around it with firm pressure, especially at curves. Choose a mild, dry, shaded day. The Installation tab has more.
Before ordering
Make sure the emblem and grille are factory parts. An aftermarket or different-sized badge would change the fit; mention it when you call.
Why stainless
The mirror is polished into solid 304, not plated on, so a gentle polish restores it if it ever dulls.
Care
No washing for a few days, then mild soap and a soft cloth. Avoid scrubbing hard around the badge. The grille and emblem are unchanged underneath.
Tools you need
Nothing special: a residue-free cleaner, a few microfiber cloths, cotton swabs, painter's tape, and your phone camera for checking the margin. Set aside unhurried time in good daylight so you can see the gap clearly from every side.
MKC grille accent SG55640 has UPC 691821336517; reach Quality Automotive Trims at 877-752-3811.
SG55640 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | SG55640 |
| UPC | 691821336517 |
| Part type | Front Grille Accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Logo Surround |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2015-2018 Lincoln MKC |
Fitment: SG55640
| Vehicle | Years | Body style |
|---|---|---|
| Lincoln MKC | 2015-2018 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2015-2018 Lincoln MKC
- LB55640: 1-piece License Bar, Above plate accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Front Grille Accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: SG55640 Front Grille Accent Trim
Which Lincoln does SG55640 fit?
The MKC 4-door SUV, 2015 through 2018.
Does it cover the emblem?
No. The record calls it a "Logo Surround"; it frames the emblem.
How many pieces?
One.
What else is linked?
LB55640, a license bar listed at 1.375 inches.
Is grille removal required for this one?
No, 3M tape over the existing surface.
