Product Description
Lincoln MKX 2016-2018 Grille Logo Surround, 1-Piece Polished Stainless (SG56660)
SG56660 is a one-piece polished stainless logo surround for the grille emblem of the Lincoln MKX SUV, model years 2016, 2017 and 2018. Its only linked companion is a long strip for the rear, which makes for a simple two-part front-and-back project.
MKX only
The fitment names the MKX 4-door SUV, 2016 through 2018, no exclusions. QAA lists logo surrounds for other Lincolns under different part numbers, and this record covers the MKX only; for another Lincoln, call Quality Automotive Trims at 877-752-3811.
A surround, not a cover
The piece borders the badge and leaves it visible. Size and outline aren't in the data, so rely on the product photos.
Material and mounting
26-gauge 304 stainless steel, mirror polished, made in the USA, with 3M automotive-grade acrylic foam tape. It goes over the existing surface, and the emblem isn't removed. QAA states the tape will hold for a lifetime without causing damage to the vehicle surface.
The rear marker light strip
ML56660 is a one-piece accent that spans between the rear marker lights, listed as 1" width by 30.836" length. That's a long, precise strip, so measure your MKX's rear before ordering it. Check its listing for its finish.
Two very different installs
The surround is a short, curved piece that needs an even margin. The rear strip is long and straight and needs a level line. If you're doing both, do the surround first while you're fresh for detail work, then the strip with a helper holding the far end.
Clean around the badge
Wash and dry the front. Clean the landing area with a film-free solvent and use swabs at the emblem's edges until they stay clean.
Fitting the surround
Liner on, place it around the logo and check the gap on all sides. A photo zoomed in on your phone makes uneven margins easy to spot. When it's right, peel slowly and press around the curves, then go round once more with firm pressure. Mild, dry, shaded weather is best. See the Installation tab.
Before ordering
Confirm the year and that your grille and emblem are factory parts. Aftermarket badges can differ in size, so mention any change when you call.
Why polished 304
No plating means nothing to peel; a light polish restores the shine.
Care
Leave it a few days before washing. Then mild soap and a soft cloth, gently around the badge, and keep pressure-washer nozzles at a distance from the surround's edges.
Measuring for the rear strip
If you're buying ML56660 too, run a tape measure between your rear marker lights before ordering. The listed length is 30.836 inches; if your measurement looks very different, call us before buying. For the front surround, no measuring is needed beyond checking the photos against your grille.
What changes
Only the look. The emblem and grille stay exactly as they are, and the surround simply puts a bright outline around them.
For the 2016-2018 MKX, grille accent SG56660 carries UPC 691821256297. Call 877-752-3811.
SG56660 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | SG56660 |
| UPC | 691821256297 |
| Part type | Front Grille Accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Logo Surround |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2016-2018 Lincoln MKX |
Fitment: SG56660
| Vehicle | Years | Body style |
|---|---|---|
| Lincoln MKX | 2016-2018 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2016-2018 Lincoln MKX
- ML56660: 1-piece Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Front Grille Accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: SG56660 Front Grille Accent Trim
Which Lincoln does SG56660 fit?
The MKX 4-door SUV, 2016 through 2018.
Does it cover the emblem?
No, it surrounds it.
How many pieces?
One.
What's the linked rear part?
ML56660, a strip between the rear marker lights, 1" width by 30.836" length.
How does it attach?
3M tape over the existing surface.
