Product Description
Ford Focus Sedan 2015-2018 Stainless Molding Insert Kit, 4 Pieces (MI55345)
MI55345 is a four-piece set of polished 304 stainless molding insert strips for the Ford Focus 4-door sedan, model years 2015 through 2018. The record is missing one figure that most of our insert kits carry: a width. That gap shapes how you should check fit before ordering.
No width listed
Neither the width field nor the bullets give a measurement for these strips. So instead of comparing a ruler reading against a number, rely on the product photos. Look at how the strips sit on the moldings in the pictures, compare that with the moldings on your Focus, and if you'd like a figure before you buy, call Quality Automotive Trims at 877-752-3811 and ask about MI55345. We've flagged the missing width so the record can be completed.
Fitment
Ford Focus, 2015 to 2018, 4-door sedan. One row, four model years; the title matches. Only the sedan is listed for this kit, so if your Focus is another body style, this row doesn't cover it.
Material and mounting
26 gauge 304 stainless steel with a polished finish, made in the USA. The strips mount with 3M automotive-grade acrylic foam tape and install directly over the existing surface, so you won't drill anything. The record doesn't assign each strip to a door; use the photos.
Installing
Clean the moldings first: soap and water, dry, then rubbing alcohol. Lay out the four strips by the photos and label each liner. Dry-fit with the liner on and center each strip so the margin to the molding edges looks even along its length. Mark the ends with painter's tape. Peel the liner, set the strip and press firmly from one end to the other. Step back after each strip to check the line. The Installation tab gives the temperature range; a dry, mild day is best.
Linked Focus sedan parts
Nine others share the sedan tag. GC55345 is a 1-piece gas door cover trim, LP55345 a 1-piece license plate bezel, RB55345 a 1-piece rear bumper trim accent, and RD55345 a 1-piece rear deck accent, each sold separately. Two rocker panel parts are listed: TH55345, an 8-piece lower kit that spans from the bottom of the door up to the specified width, with a tapered width note that's garbled in the record, so call before ordering it; and TH55346, a 2-piece trim that goes on the rocker and installs below the door, at 1.25. WQ55345 is a 4-piece wheel well accent trim. LB55345 and WQ55346 are cross-listed by number only.
Molding condition
Because the strips sit on the moldings, look each one over for cracks, lifting ends and old adhesive, and deal with those before starting.
Using the photos well
With no width on file, the photos carry more weight. Look at where each strip starts and stops on the molding, how much of the molding face it covers, and how the ends are shaped. Then compare your own car from the same angle.
Care
Mild soap, water and a soft cloth. Avoid steel wool and abrasive pads. Questions? 877-752-3811.
MI55345 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | MI55345 |
| UPC | 691821687411 |
| Part type | Body Molding Insert Trim Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2015-2018 Ford Focus |
Fitment: MI55345
| Vehicle | Years | Body style |
|---|---|---|
| Ford Focus | 2015-2018 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2015-2018 Ford Focus
- GC55345: 1-piece Gas Door Cover Trim
- RB55345: 1-piece Rear Bumper Trim Accent
- TH55345: 8-piece Rocker Panel Trim, Lower Kit
- LP55345: 1-piece License Plate Bezel
- TH55346: 2-piece Rocker Panel Trim, On the rocker
- RD55345: 1-piece Rear Deck Accent
- WQ55345: 4-piece Wheel Well Accent Trim
- LB55345: 1-piece License Bar, Above plate accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Molding Insert Trim Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: MI55345 Body Molding Insert Trim Kit
What does MI55345 fit?
The Ford Focus 4-door sedan, 2015 through 2018.
How wide are the strips?
The catalog doesn't list a width. Check the photos or call 877-752-3811.
How many pieces are there?
Four.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What's the material?
Polished 304 stainless steel, 26 gauge, made in the USA.
