Product Description
Lincoln Nautilus 2024-2026 Molding Insert Trim Kit: 8 Polished Stainless Strips, 1.5 Inch (MI74660)
MI74660 is an eight-piece set of stainless molding inserts for the Lincoln Nautilus, model years 2024 through 2026, tagged 4-door SUV. Each strip is 1.5 inches wide and cut from 26 gauge 304 stainless steel with a polished finish, made in the USA. The strips go on the body side moldings already fitted, so the Nautilus gets bright trim with no panels changed.
Does it fit my Nautilus? There is one fitment row: Lincoln Nautilus, 2024-2026, 4-door, SUV. The title matches it. MI74660 is listed for Nautilus models of 2024 to 2026. Then measure the flat face of one body side molding and compare it with 1.5 inches and the product photos. If your moldings look different from the photos, or you're unsure, call Quality Automotive Trims at 877-752-3811 with MI74660 and we'll check before anything ships.
How does it attach? With 3M automotive-grade acrylic foam tape, installed directly over the existing surface. Nothing has to be drilled or taken off. For Nautilus fit, ring 877-752-3811.
Which strip goes where? The listing doesn't assign positions, so the photos are the map. On a clean towel, match the eight Nautilus pieces to the gallery and mark each liner with its position. Each of the eight is polished stainless steel, listed for the Nautilus.
What prep is needed? Clean moldings are the whole job. Wash with soapy water, rinse, and dry fully. Wipe each molding face with rubbing alcohol and let it evaporate. If any molding has a lifting end or a crack, repair it first; the stainless can only be as secure as what it sits on. Work on a mild, dry day within the temperature range shown in the Installation tab.
What's the install sequence? Hold each strip in position with the liner still on and mark the ends with small pieces of painter's tape. When the whole side looks right, peel the first liner, set the strip to its marks, and press firmly along its entire length. Repeat strip by strip until all eight are on. Give the tape the cure time listed in the Installation tab before the first wash.
What else is listed for this Nautilus? Pillar post trim comes in three counts: PP74660 with 4 pieces, PP74661 with 6, and PP74662 with 8. RW74660 is a 2-piece rear window trim set. GC74660 is a 1-piece gas door cover trim. LP74660 is a 1-piece license plate bezel. RD74660 is listed as a 1-piece Rear Deck Accent at 2.5 inches; check that part's photos to see where it sits on the SUV, since the record gives no position for it at all. Three more parts are cross-listed by number only.
How do I care for it? Mild soap, water and a soft cloth. Avoid steel wool and abrasive pads on the polish, and rinse off road salt rather than letting it sit on the trim. A quick wipe after washing keeps water spots off the strips.
MI74660 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | MI74660 |
| UPC | 840251604721 |
| Part type | Body Molding Insert Trim Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.5" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2024-2026 Lincoln Nautilus |
Fitment: MI74660
| Vehicle | Years | Body style |
|---|---|---|
| Lincoln Nautilus | 2024-2026 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2024-2026 Lincoln Nautilus
- PP74660: 4-piece Pillar Post Trim
- PP74661: 6-piece Pillar Post Trim
- PP74662: 8-piece Pillar Post Trim
- RW74660: 2-piece Rear Window Trim
- GC74660: 1-piece Gas Door Cover Trim
- RD74660: 1-piece Rear Deck Accent
- LP74660: 1-piece License Plate Bezel
- WP74660: 14-piece Window Trim Package
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Molding Insert Trim Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: MI74660 Body Molding Insert Trim Kit
Which vehicle is MI74660 for?
The 2024-2026 Lincoln Nautilus, 4-door SUV.
How many strips and how wide?
Eight strips, each 1.5 inches wide.
Is any drilling needed?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
Are positions marked on the strips?
The listing doesn't give positions; use the product photos.
Who can confirm fit?
Call Quality Automotive Trims at 877-752-3811 & mention MI74660.
