Product Description
PP14043 Ten-Piece Pillar Post Trim, Infiniti QX50 2014-2017
Ten covers is the largest pillar post count QAA lists for the 2014-2017 Infiniti QX50, and PP14043 is that set. The pieces are polished 304 stainless steel at 26 gauge, made in the USA, and they're listed on one row: Infiniti QX50, 2014-2017, 4-door, SUV. Title and row line up.
Is the biggest set the right one? Not automatically. PP14040, PP14041 and PP14042 offer four, six and eight pieces for the same row, and none of the four listings has a note or names the pillars it covers. More pieces means more covers in the box, but where the further ones go isn't stated. The photo gallery is where that answer lives, so compare the outlines before you decide. If you want as much of the pillar area in stainless as QAA offers for this QX50, and the photos show the shapes you're after, this is the set. Buy just one; we can talk it through at 877-752-3811.
Attachment. 3M automotive-grade acrylic foam tape holds each cover directly over the existing surface. No drilling, nothing removed. For the ten-piece QX50 set, prep steps are under Installation.
Material. 304 stainless with a polished face. There's no plated layer to lift, and the 26 gauge sheet sits slim against each pillar.
Ten pieces take a plan. With this many covers, a dry run is the difference between a neat job and a muddle. Lay all ten on a soft towel and match them to the photos. Starting at one corner of the QX50, offer each cover up with its liner on, find where it sits flush, and mark the ends with painter's tape. Write its position on the liner. Map every cover, comparing similar shapes as you go. If a cover won't settle on a pillar, try it on another before assuming it's wrong. Polished stainless steel forms each of the QX50's ten covers.
Prep before peeling. Wash with a mild soap, rinse, and dry. Wipe each pillar with isopropyl alcohol on a lint-free cloth and let it flash off. Remove wax or coatings where tape will sit, or the tape will grip the coating instead of the paint.
Setting the covers. Peel one liner at a time, place the cover between its marks and press firmly from one end to the other and along both edges. Then move to the next post. After every two covers, step back and compare. The Installation tab gives the temperature range and cure time.
Time and place. Set aside a dry afternoon in shade or a garage; ten covers take longer than a smaller set, and rushing the mapping step is where mistakes happen. A step stool helps with the tops of the pillars, and a helper is useful for judging level.
Before and after. Confirm QX50 and a 2014-2017 year. Count ten covers against the photos when the box arrives. Afterward, mild soap and a soft cloth keep the polish bright. Questions: 877-752-3811, quoting PP14043. Keep PP14043 ready for your call.
PP14043 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP14043 |
| UPC | 691821292028 |
| Part type | Pillar Post Trim |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2017 Infiniti QX50 |
Fitment: PP14043
| Vehicle | Years | Body style |
|---|---|---|
| Infiniti QX50 | 2014-2017 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2017 Infiniti QX50
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP14043 Pillar Post Trim
What does PP14043 fit?
The Infiniti QX50 2014-2017, tagged 4-door and SUV.
Is ten pieces the most QAA lists for the QX50?
Yes. The other QX50 pillar sets have four, six and eight pieces.
Does it include every pillar?
The listing doesn't name its pillars. Check the photos or call 877-752-3811.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What if a piece doesn't fit where I expect?
Keep the liner on, try another pillar, and call us with PP14043 if it still won't sit flush.
