Product Description
1998-2001 Nissan Altima Four-Piece Stainless Pillar Covers (PP98550)
PP98550 fits the Nissan Altima 4-door sedan from 1998 to 2001 with four pillar post covers in mirror-polished 304 stainless steel. They are made in the USA and press onto the existing pillars with 3M tape, so the install takes no tools beyond cleaning supplies.
Start with the year
This record covers four model years: 1998, 1999, 2000, and 2001. Altimas from before or after that window are cataloged separately, if at all, so check your registration before you go further.
Choosing a piece count
The Altima has two QAA pillar kits on file. This one holds four covers; PP98551 holds six. Because the catalog carries no coverage note on either, it does not identify which posts the four here dress or where the larger kit's further pair goes. Put the photos of both kits side by side, and call if the difference is still unclear.
Specifications
- Four covers
- 304 stainless steel, 26 gauge
- Mirror-polished face
- Altima covers made in the USA
- 3M automotive-grade acrylic foam tape mounts the Altima covers
- UPC 691821325085
Adhesive you can trust
The covers sit over the existing pillar surface. QAA states the tape will hold for a lifetime without causing damage to the vehicle surface, as long as the paint underneath is clean and solid.
Paint preparation
Wash the car, dry the pillars completely, and remove wax or sealant with a residue-free wipe. Look closely at the clear; anything flaking should be repaired before a cover goes over it. A few minutes here prevent a lifted corner later.
Fitting the four covers
Choose shade and a mild, dry day. Set each cover in place with its liner on and check that it follows the edge of the door frame. When it lines up, peel the liner and press firmly over the full length, working from one end. Fit one Altima cover, then step back and look along the car before starting the next. Avoid washing for a few days. The Installation tab gives the full sequence.
Why polished stainless
The mirror finish is part of the steel itself. Without a plated layer, there is nothing to wear through, and the four pieces will always match.
Simple upkeep
Soap, water, and a soft towel are all it needs. Keep scouring pads off the polished surface.
A tidy upgrade for a commuter
For a sedan that still does daily duty, four bright accents freshen the side view without any permanent change to the car. The original pillars stay exactly as they are underneath the covers.
A word on handling
Leave each liner in place until its cover is lined up and ready. The adhesive picks up dust and skin oil easily, and a contaminated patch is the most common reason an edge refuses to stay down. Rest the waiting pieces face up on a clean towel so the polished side does not get scuffed on the driveway.
Part information
SKU PP98550, UPC 691821325085. Questions about your Altima can go to Quality Automotive Trims at 877-752-3811.
PP98550 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP98550 |
| UPC | 691821325085 |
| Part type | Pillar Post Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1998-2001 Nissan Altima |
Fitment: PP98550
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Altima | 1998-2001 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1998-2001 Nissan Altima
- PP98551: 6-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP98550 Pillar Post Trim
What does PP98550 fit?
The 4-door Nissan Altima sedan, 1998 through 2001.
How many covers are included?
Four. PP98551 is the six-piece kit for the same sedan.
What is the difference between the two kits?
The catalog data does not describe coverage for either. Compare the photos or call 877-752-3811.
How does it attach?
With 3M automotive-grade acrylic foam tape over the existing surface.
What is it made of?
Mirror-polished 26-gauge 304 stainless steel, made in the USA.
