Product Description
Nissan Altima 2019-2026 Four-Piece Pillar Post Trim (PP19550)
Four polished stainless covers for the pillars of the 2019-2026 Nissan Altima 4-door sedan: that's PP19550, listed at $62.49. The Altima sheet links two larger pillar sets as well, PP19551 with six covers and PP19552 with eight, so you're choosing among three counts.
None of the three listings explain where their covers go. There are no notes, no widths and no pillar names on any of them. That leaves the galleries. Flick through the four shapes here, then the six and the eight, and spot any outline the larger sets show that this one doesn't. Hold those up against the uprights of your own Altima. If four pieces give the look you're after, you get the shortest fitting job. If you'd like stainless in more spots, look at a larger set. Just pick one count; look at each set's photos side by side.
Fitment is listed as Nissan Altima, 2019-2026, 4-door, Sedan, which runs to eight model years. Look for an Altima year from 2019 to 2026. Anything outside that range, or any doubt at all, is worth a call to Quality Automotive Trims at 877-752-3811 with the part number PP19550 handy.
The material is 26 gauge 304 stainless steel, polished, made in the USA. The steel is bright on its own, so no plating sits on top that could lift or dull. The mounting is 3M automotive-grade acrylic foam tape, laid directly over the existing surface. No holes go into the Altima, and its own trim stays exactly where it is.
As for fitting, the Installation tab is the authority on the tape's temperature range and cure time, so start there. The rest is mostly care and patience.
Pick a calm, dry day and a shaded spot; hot panels and wind both make placement harder. Lay out a towel and unpack onto it, counting four covers and comparing each one with the photos. If anything's damaged or short, phone before touching the car.
Clean the four pillar faces properly. Soap and water first, then a rinse and a thorough dry. After that, a wipe with isopropyl alcohol on a lint-free cloth lifts any leftover film. Wax and ceramic coatings block the bond, so make sure none remains where the tape will touch.
Work out which cover goes where by holding each one against the car with its liner still in place. When the edges sit right, frame the cover with a few bits of painter's tape so you can find the spot again. Do this for all four before peeling anything.
Now commit, one cover at a time. Peel the liner, lower the cover onto its frame and run your thumb firmly from one end to the other, then along each edge. Go straight to the next cover so the two can be judged together, and then on to the last two.
Walk round the car and look at the lines. A cover that refuses to sit flat should keep its liner until you've called 877-752-3811. Once the cure time is up, wash with ordinary car soap.
PP19550 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP19550 |
| UPC | 691821617777 |
| Part type | Pillar Post Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2019-2026 Nissan Altima |
Fitment: PP19550
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Altima | 2019-2026 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2019-2026 Nissan Altima
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP19550 Pillar Post Trim
What does PP19550 fit?
The 2019-2026 Nissan Altima, 4-door Sedan.
How many covers?
Four. PP19551 has 6 & PP19552 has 8.
Which pillars are covered?
The listing doesn't say. Compare the photos or call 877-752-3811.
Can I combine Altima sets?
Choose one. Choose one Altima listing after a look at the galleries.
Is drilling needed?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
