Product Description
Chevrolet Spark 2013-2015 Pillar Post Trim, Four Stainless Covers (PP53110)
PP53110 is a set of four polished stainless pillar post covers for the Chevrolet Spark, priced at $56.99. They're cut from 26 gauge 304 stainless steel and made in the USA. The record lists one fitment row, Chevrolet Spark 2013-2015, tagged 4-door, Subcompact Car, so it spans three model years of the Spark.
Two larger Spark pillar sets are linked to the same row: PP53111 with six covers and PP53112 with eight. None of the three carries a note, names its posts or lists widths, so the record can't say in words how far each one reaches. The gallery photos can. Open all three, then walk round your Spark and count the posts you'd like dressed, and pick the count that matches. No other trim is linked to this record.
Only Sparks of 2013, 2014 and 2015 are on the row. The row covers 2013 through 2015, and a Spark from outside that span isn't listed for this set. If you'd like a second pair of eyes on the year or the choice of set, call Quality Automotive Trims on 877-752-3811 and quote PP53110.
These four covers are a cosmetic change to the posts beside the side glass. The doors, windows and weatherstrip carry on working exactly as before. Because 304 stainless resists corrosion through its own alloy, there's no plated layer to flake.
On the Spark the covers rely on tape alone: each one mounts with 3M automotive-grade acrylic foam tape over the post's existing paint or trim. There's nothing to drill and no trim to pry off the Chevrolet. The Installation tab gives the temperatures the tape needs and the cure time before a wash.
Prepare the four posts carefully. Have low-tack painter's tape, a pencil, rubbing alcohol, a bucket of car-soap water and a few lint-free cloths ready. Strip any wax or polish. If the paint is chalky, crazed or flaking where a cover will sit, repair it first, since the tape bonds to that coat. Wash, rinse and dry, then wipe each post with rubbing alcohol, refolding to a clean face until nothing comes off. Feel along each post for dents.
Choose shade and a dry day with no wind. Unpack the four, compare them with the gallery and tell us at once about any damage. Decide each cover's post and mark it with a numbered strip of tape. With the liner still on, hold the first cover in place, slide it until the reveal is even and outline it in painter's tape. Peel the liner, set the cover back inside the outline and press firmly along its length and both edges. Look it over before the next.
Should one refuse to sit flat along its post, or lift at a corner once you take your hand away, don't lean on it and don't trim it. Keep its liner on, put it to one side on a clean towel and phone us on 877-752-3811 so we can help you work out why. When the tape under the other covers has cured, the Spark's four need only a wash with car soap and water and a soft towel to dry them.
PP53110 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP53110 |
| UPC | 691821359547 |
| Part type | Pillar Post Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2015 Chevrolet Spark |
Fitment: PP53110
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Spark | 2013-2015 | 4-door, Subcompact Car |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2013-2015 Chevrolet Spark
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP53110 Pillar Post Trim
What does PP53110 fit?
The Chevrolet Spark 2013-2015, tagged 4-door, Subcompact Car.
Are larger sets available?
Yes: PP53111 (six covers) and PP53112 (eight).
Do I need to drill?
No. The covers mount with 3M automotive-grade acrylic foam tape directly over the existing surface.
How do I clean them?
Car soap and water once cured, then a soft towel.
