Product Description
Infiniti JX35 2013 and QX60 2014-2020 Pillar Post Trim, 4-Piece Stainless (PP13035)
PP13035 has two fitment rows: the Infiniti JX35 for 2013, and the Infiniti QX60 from 2014 to 2020. Both are tagged 4-door SUV, and the title names both with those years, so this four-piece set is listed for either SUV. The JX35 row is a single year, so a JX35 owner should check for 2013 exactly; if you want certainty before ordering, a quick call settles it.
The set is four pillar post covers in polished 26 gauge 304 stainless steel, made in the USA. Two larger sets share the same two rows: PP13036 with six pieces and PP13037 with eight. None of the three listings has a note or names its pillars, so the comparison happens in the photos. Open all three and match the pieces to your vehicle's pillars. If four cover the ones you care about, this is the shortest job of the three. If the bigger sets' photos show pillars you'd want as well, order one of those. The data doesn't say whether the sets overlap, so buy one.
Which row is yours? Check it's a JX35, and a 2013. A 2013 JX35 matches the first row. A QX60 from 2014 through 2020 matches the second. Anything outside those two, call Quality Automotive Trims at 877-752-3811 and mention PP13035.
Attachment. On the JX35 or QX60, each of the four covers mounts with 3M automotive-grade acrylic foam tape over the existing posts; nothing is drilled or removed from the Infiniti.
Preparation. Wash the pillars with warm soapy water, rinse and dry. Wipe each with rubbing alcohol on a lint-free rag and let it evaporate. Take any wax, sealant or ceramic coating off the tape areas, and fix chips or flaking first.
Fitting. Hold each cover to its pillar with the liner on. Compare with the photos and sight along both edges; they should follow the pillar. If not, try another pillar. Once it's right, mark the ends with painter's tape and write the spot on the liner.
Pressing. Peel, align with the marks and press firmly end to end, then run your thumb down both edges. Use a step stool for the upper ends. Compare all four from a few steps back when you're done. The Installation tab lists the temperature range and cure time.
Light. Garage or shade. Glare off glass and polished steel hides a crooked edge.
Kit. A bucket and sponge, towels, rubbing alcohol, a rag, painter's tape, a pen and the product photos.
If unsure. Don't peel a cover that won't sit right. Photograph it held in place and call us.
Care. Wipe with a soft cloth and mild soap, keeping steel wool well away.
The Fitment tab shows both rows; the Specs tab lists material and count.
Order of work. Fit two covers fully, then match the remaining two to them. A helper standing back a few steps can tell you whether each cover sits level before its liner comes off, which is much easier than judging it from close up.
PP13035 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP13035 |
| UPC | 691821549160 |
| Part type | Pillar Post Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013 Infiniti JX35 and 2014-2020 Infiniti QX60 |
Fitment: PP13035
| Vehicle | Years | Body style |
|---|---|---|
| Infiniti JX35 | 2013 | 4-door, SUV |
| Infiniti QX60 | 2014-2020 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Infiniti JX35
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP13035 Pillar Post Trim
Does PP13035 fit the Infiniti QX60?
Yes. Two Infiniti names share the rows and the title: the QX60 for 2014-2020 and the JX35 for 2013.
Which JX35 year is listed?
Only 2013. The QX60 row picks up from 2014.
What other sets are there?
PP13036 with six pieces and PP13037 with eight, with the same rows.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
How many pieces?
Four.
