Product Description
Infiniti Q50 Sedan 2014-2024 Pillar Post Trim, Four Pieces (PP14050)
PP14050 covers the pillars of the Infiniti Q50 sedan with four polished stainless pieces. The fitment row spans eleven model years, 2014-2024, tagged 4-door and Sedan, and the title says the same. The covers are 26 gauge 304 stainless steel, made in the USA, and they go on with 3M automotive-grade acrylic foam tape directly over the existing surface.
A long year range, one row
Eleven years under a single row means the catalog treats every Q50 sedan from 2014 through 2024 as the same fit for this set. That helps, but it's also why you should check the exact year instead of going by memory. If your Q50 falls outside that span, or you're not sure whether it's the sedan, call 877-752-3811 with PP14050 before ordering.
Four or six
QAA lists one other pillar set for the Q50: PP14051, with six pieces. Neither listing has a note, and neither names the pillars it covers or mentions a triangle piece. Put the two photo galleries side by side and look for the shapes that appear only in the six-piece set. If the four-piece set already covers the pillars you care about, it's the simpler job. If you want the further shapes, choose PP14051 instead. Pick one set, and look at the photos or call 877-752-3811 before pairing it with another.
Mounting without drilling
Because the covers sit directly over the existing surface on 3M automotive-grade acrylic foam tape, nothing comes off the Q50 and no holes are drilled.
The stainless
Polished 304 stainless is metal through its whole thickness. There's no plating to chip or peel, and the 26 gauge sheet keeps the covers slim against the pillars. Mild soap and a soft cloth keep it bright; skip abrasive pads, which can haze a polished face.
Prep checklist
- Hand-wash the pillars with a gentle shampoo and rinse well.
- Dry with a clean microfiber.
- Wipe with isopropyl alcohol on a lint-free cloth; let it flash off.
- Clear wax, sealant or ceramic coating from the spots where tape goes.
Placement
With the liner still on, hold each cover to a pillar and sight along both edges until it follows the post without rocking. Mark the ends with painter's tape and write the door on the liner. After all four are mapped, peel one liner, set the cover between its marks and press firmly from end to end and along both edges. Put the next Q50 cover on, then stand back to check it. The Installation tab lists the temperature range and cure time.
Conditions
Work on a dry day, out of direct sun or in a garage, so the panel is cool and the alcohol dries evenly. A helper standing a few paces back can judge level before each liner comes off.
On arrival
Count four covers against the photos before starting. If one doesn't seem to match your Q50, keep its liner on, try another pillar, and call Quality Automotive Trims at 877-752-3811 with PP14050 if it still won't sit right.
PP14050 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP14050 |
| UPC | 691821512683 |
| Part type | Pillar Post Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2024 Infiniti Q50 |
Fitment: PP14050
| Vehicle | Years | Body style |
|---|---|---|
| Infiniti Q50 | 2014-2024 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2024 Infiniti Q50
- PP14051: 6-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP14050 Pillar Post Trim
What does PP14050 fit?
The Infiniti Q50 2014-2024, tagged 4-door and Sedan.
What's the difference from PP14051?
PP14051 has six pieces. Neither names its pillars, so compare photos and choose one.
Does it fit other Q50 body styles?
Only the 4-door Sedan is listed. Call 877-752-3811 about anything else.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
