Product Description
PP11058: Six-Piece Stainless Pillar Trim With Triangle Piece, Infiniti M37 / M56 / Q70 Sedan
One short note sets PP11058 apart from the other pillar sets on this sheet: "Includes Triangle piece." It's a six-piece set of polished 26 gauge 304 stainless steel, made in the USA, and it's the only one of the three sets listed for these sedans that mentions a triangle piece. The catalog doesn't describe the triangle piece's shape or where it sits, so the product photos are where to find it. If that piece is the reason you're shopping, compare the photos carefully or call Quality Automotive Trims at 877-752-3811 and mention PP11058.
The other two sets. PP11057 has four pieces and PP11059 has eight; neither listing carries a note. The record doesn't say whether either includes a triangle piece, so don't assume the eight-piece set contains everything in this one. Look at all three sets of photos, or ask us.
Fitment rows and the title. The title reads "Fits 2011-2013 Infiniti M37, M56, 2014-2020 Infiniti Q70," and the rows say the same: the Infiniti M37 for 2011-2013, the Infiniti M56 for 2011-2013, and the Infiniti Q70 for 2014-2020, all as 4-door sedans. Match your model name first, then the year. The M37 and M56 share the same three years, so for those two the badge matters less than the date.
Mounting. The M37's six covers are held on the existing pillar surface by 3M automotive-grade acrylic foam tape, with nothing drilled or removed.
Finding the triangle piece in the box. When the set arrives, lay all six pieces out and match them to the photos. The triangle piece should be easy to pick out by its shape. Hold it up to the spot the photos show, liner on, and confirm the fit before doing anything else. Order the remaining five by position.
Preparation. Wash the pillars and the triangle-piece area with soapy water, rinse and dry. Wipe with rubbing alcohol and let it flash off. Strip wax or sealant from contact areas and repair any chipped or peeling finish.
Installation. Label each liner during the dry fit and mark each piece's ends on the car with painter's tape. Work one at a time: peel, set to the marks, press firmly along the full length, and seat the edges with a fingertip. Small pieces like a triangle need firm pressure over their whole surface, including the corners. Check the pieces from a few steps back, then compare. Install on a dry day within the Installation tab's temperature range and wait the listed cure time before washing.
If a piece won't fit. Keep its liner on, try another pillar, recheck the photos, and call us with a photo if needed.
Conditions. Work in open shade or a bright garage; reflections off glass and polished stainless make it hard to judge small gaps. Avoid cold, damp or very hot days, which aren't kind to foam tape. Keep the photos open on a phone the whole time, especially when placing the triangle piece.
Care. Mild soap, water and a soft cloth; never abrasive pads.
PP11058 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP11058 |
| UPC | 691821427444 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Includes Triangle piece |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2011-2013 Infiniti M37, 2011-2013 Infiniti M56 and 2014-2020 Infiniti Q70 |
Fitment: PP11058
| Vehicle | Years | Body style |
|---|---|---|
| Infiniti M37 | 2011-2013 | 4-door, Sedan |
| Infiniti M56 | 2011-2013 | 4-door, Sedan |
| Infiniti Q70 | 2014-2020 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Infiniti M37
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP11058 Pillar Post Trim
What is the triangle piece?
The listing notes PP11058 includes one but doesn't describe it. The photos show it, or call 877-752-3811.
What vehicles are listed?
Infiniti M37 & M56 2011-2013 and Q70 2014-2020, 4-door sedan, in both the rows and the title.
How many pieces?
Six, including the triangle piece.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
Do the other sets include a triangle piece?
Their listings don't mention one. Check the photos or ask us.
