Product Description
Six-Piece Stainless Pillar Trim, Kia Telluride 2020-2025 (PP70851)
Between the four-piece and eight-piece Telluride kits sits PP70851: six polished stainless steel pillar covers, listed for the 4-door Kia Telluride SUV, model years 2020 through 2025.
Middle of the range
QAA's Telluride pillar kits are PP70850 (four pieces), this six-piece set, and PP70852 (eight pieces, noted as including a front triangle piece). All three share fitment. The catalog does not specify which posts the six pieces here cover, and it does not attach a triangle note to this kit. Compare the photos on the three listings to see the layouts.
Why six works for many owners
Six covers make the stainless clearly visible without going to the fullest set. It is a balanced choice for drivers who want the upgrade to be noticed but still look measured on the side of the SUV.
The vehicle
Kia Telluride, 4-door SUV, 2020 through 2025. No other vehicles are listed for this part. The Fitment tab shows the record.
Made in the USA
QAA produces these covers from 304 stainless steel at 26 gauge and finishes them with a mirror polish. There is no plated surface, so the shine belongs to the metal and is identical from piece to piece.
Attachment without tools
For the Telluride, the six covers press on with 3M automotive-grade acrylic foam tape over the pillars as they are. Nothing is taken apart. Per QAA, the tape is good for a lifetime and leaves the SUV undamaged.
Doing the job
- Wait for a dry, mild day and work out of direct sun.
- Wash, dry, de-wax each Telluride pillar.
- Find the six Telluride covers in the photos.
- Dry-fit each one before peeling the liner.
- Press firmly along the full length; avoid washing for a few days.
The Installation tab has the full procedure.
A template cover
Fit one Telluride cover first, then use it as your template for the other five. Step back after each cover and look along the Telluride from the front and rear. Even lines are what make six pieces look intentional.
Upkeep
Mild soap and water, a thorough rinse, and a soft towel. Skip scouring pads and abrasive compounds so the mirror finish stays clear.
What the pillars do
Pillars are the vertical posts that frame the side windows and support the roof. Polished stainless on those posts gives the glass a bright, defined edge that contrasts with the paint. The covers are cosmetic and sit over the original surface, which stays exactly as it was.
Before you order
Check the model year on your registration and make sure it falls between 2020 and 2025. Then decide how much stainless you want. The photos on each of the three Telluride listings are the fastest way to picture the finished look, and QAA can describe the differences over the phone if you would rather talk it through.
Deciding between six and eight
If the front triangle note on the eight-piece kit appeals to you, compare PP70852 before ordering. If not, six gives a confident look on its own. Each kit is a complete set.
Details
Part number PP70851, UPC 691821263998. Full specs are on the Specs tab. Call Quality Automotive Trims at 877-752-3811 with any questions.
PP70851 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP70851 |
| UPC | 691821263998 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2020-2025 Kia Telluride |
Fitment: PP70851
| Vehicle | Years | Body style |
|---|---|---|
| Kia Telluride | 2020-2025 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2020-2025 Kia Telluride
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP70851 Pillar Post Trim
How many pieces are in PP70851?
Six polished stainless steel covers.
Which Telluride years fit?
2020 through 2025, 4-door SUV.
Does it include the front triangle?
The catalog notes a front triangle piece only for the eight-piece PP70852.
How does it attach?
With 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing damage to the vehicle.
What is it made from?
Polished 26-gauge 304 stainless steel, made in the USA.
