Product Description
Eight-Piece Polished Stainless Pillar Trim, Subaru Outback 2010-2014 (PP10482)
Of the three pillar post sets listed for the 2010-2014 Subaru Outback 4-door Crossover SUV, PP10482 has the most pieces: eight, in polished 26 gauge 304 stainless steel, made in the USA. The four-piece PP10480 and six-piece PP10481 carry the same fitment tags. No listing in the trio names its pillars, so the product photos are the reference for what each one covers. Take a look at all three before you decide.
The title and the fitment row agree: Subaru Outback, 2010 to 2014, 4-door, Crossover SUV. Check your model year against the range. If you're unsure about anything, Quality Automotive Trims can help at 877-752-3811; give us PP10482. Weighing up the eight-piece Outback set? Talk it over with us on 877-752-3811. The Installation tab explains Outback prep.
These pieces mount with 3M automotive-grade acrylic foam tape, installed directly over the existing surface. There's no drilling and no trim to pull. Give the pillars a final alcohol wipe and let them dry before fitting. It lists no width or notes either.
With eight pieces, organization is the job. Clear a table and put down a towel. Lay the pieces out using the photos, then order them from front to back. Carry the pieces out to the Outback and hold each to its pillar with the liner still attached, checking it against the pillar's edges. When a piece fits, label the liner with its side and position. If a piece won't sit right, recheck its spot against the photos before worrying. Keep the labeled pieces in their rows on the towel until the moment each one goes on. Polished stainless steel forms all eight Outback covers.
Preparation comes next. Wash the pillars with soapy water and dry them fully. Wipe with rubbing alcohol on a clean cloth and give it time to evaporate. Remove any wax, sealant or coating from the contact areas. On a vehicle from these years, check carefully for chips or a lifting finish near the glass and repair it before you go further.
Install side by side. Take each labeled piece in turn, peel the liner, align it with its pillar, and press firmly along the full length. Run a fingertip down both edges. When half are on, step back and look at them as a whole. Then do the rest and compare from a few steps away. Pick a dry day inside the temperature range in the Installation tab, and stay out of strong direct sun if you can, because glare off the glass hides small misalignments. Allow the listed cure time before the first wash.
If any piece doesn't seem to match during the dry fit, stop and call us with a photo of it held in place. It's much easier to solve before a liner comes off.
Ongoing care is simple: mild soap and water, a soft cloth to dry, and no abrasive pads, steel wool or gritty polish. Wipe glass cleaner off the trim when you do the windows.
PP10482 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP10482 |
| UPC | 691821609185 |
| Part type | Pillar Post Trim |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2014 Subaru Outback |
Fitment: PP10482
| Vehicle | Years | Body style |
|---|---|---|
| Subaru Outback | 2010-2014 | 4-door, Crossover SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010-2014 Subaru Outback
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP10482 Pillar Post Trim
What does PP10482 fit?
The 2010-2014 Subaru Outback, 4-door Crossover SUV.
Is it the largest pillar set for the Outback?
It's the largest on this sheet. PP10480 has four & PP10481 has six.
How many pieces?
Eight.
Will I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
Which pillars does it cover?
The listing doesn't say in words. Check the photos or call 877-752-3811.
