Product Description
Eight-Piece Stainless Pillar Trim for the 2024-2026 Hyundai Santa Fe (PP74337)
PP74337 is an eight-piece set of mirror-polished stainless steel pillar covers for the Hyundai Santa Fe, listed for the 4-door SUV in model years 2024 through 2026. It is made in the USA from 304 stainless and mounts with 3M tape.
A kit listed on its own
QAA also sells four- and six-piece pillar kits for this Santa Fe, but in the catalog data this eight-piece kit is not linked to them. The only part tied to it is the RW74335 two-piece rear window trim. That is a quirk of the listing, not a difference in fitment; all three are listed for the same SUV and years. The data gives no coverage note for this kit, so it does not say which posts the eight pieces cover. Compare the photos with the smaller kits, or call to ask.
Why eight
Eight covers give the side windows the fullest bright frame among the Santa Fe pillar kits. If you already know you like polished trim, buying the largest set once is simpler than starting small and buying again, since each kit is a complete set.
Material
26-gauge 304 stainless steel, polished to a mirror. There is no plating, so the finish cannot peel, and all eight pieces look the same.
Mounting
The eight Santa Fe covers go over the existing surface with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without harming the Hyundai.
A careful eight-piece install
Choose a dry, mild day and some unhurried time. Wash and dry every pillar, then wipe off wax so the adhesive meets clean paint. Spread the covers on a towel and match each one to the photos. Dry-fit with the liners on. Once a cover sits right, peel and press firmly from one end to the other. Complete a full side before starting the next. Give the tape a few days before washing. The Installation tab has the complete procedure.
Matching rear window trim
The RW74335 two-piece rear window trim is listed for this Santa Fe and sold separately. It extends the polished look toward the back of the SUV.
Fitment
The Fitment tab lists the eight-piece kit for Santa Fe 4-door SUVs from 2024 to 2026.
Pillar posts explained
Pillars are the upright sections of the body beside the door glass. The polished covers trim them, and the original surface stays in place beneath.
Care
For the eight Santa Fe covers: mild soap, a good rinse, a soft towel, and no abrasive pads.
Before ordering
Confirm your model year on the registration. If you are buying for someone else, ask them first.
Keeping the eight covers even
With eight pieces, consistency matters more than speed. After the first few covers, look along the windows from the front corner and the rear of the SUV. Use that side as the template for the second. A helper holding the photos can confirm each placement before you press.
Part details
PP74337, UPC 840251606039, is the eight-piece kit for the 2024-2026 Santa Fe; Quality Automotive Trims takes fit questions on 877-752-3811.
PP74337 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP74337 |
| UPC | 840251606039 |
| Part type | Pillar Post Trim |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2024-2026 Hyundai Santa Fe |
Fitment: PP74337
| Vehicle | Years | Body style |
|---|---|---|
| Hyundai Santa Fe | 2024-2026 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2024-2026 Hyundai Santa Fe
- RW74335: 2-piece Rear Window Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP74337 Pillar Post Trim
What does PP74337 fit?
The 4-door Hyundai Santa Fe SUV, 2024-2026.
How many pieces?
Eight, the most of the Santa Fe pillar kits.
Why isn't it linked to the four- and six-piece kits?
That is a quirk of the catalog listing. All are listed for the same SUV and years.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing damage to the vehicle.
What is it made of?
Mirror-polished 26-gauge 304 stainless steel, made in the USA.
Who do I call?
Quality Automotive Trims, 877-752-3811.
