Product Description
Cadillac CT4 Sedan 2020-2026 Rear Bumper Accent, Polished Stainless Steel (RB60245)
RB60245 is a single polished accent for the rear bumper of the Cadillac CT4 4-door sedan, covering model years 2020 through 2026. QAA makes it in the USA from 304 stainless steel with a mirror finish, and it mounts with 3M tape over the bumper's existing surface.
Every CT4 year so far
The record lists 2020, 2021, 2022, 2023, 2024, 2025, and 2026, all for the 4-door sedan. The catalog does not split it by trim, so any CT4 sedan in that span uses this listing.
Companions at the rear
Three linked items sit close to this accent: RD60245, a second rear bumper accent; LP60245, a license plate bezel; and GC60245, a gas door cover. No widths are listed for either bumper piece, so check the product photos to see how they compare.
Two rocker kits with different starting points
The CT4's rocker kits are worth reading closely, since the notes describe them differently:
- TH60245, four pieces, a lower kit with a width of 2.2 to 3 inches, spanning from the bottom of the door upward
- TH60246, four pieces, a lower kit with a width of 1.6 to 2.2 inches, described as spanning from the under door to the specified width
Both are tapered and both have four pieces, but they start from different reference points and cover different widths. Look at the photos of each to see which suits the look you want.
Wheel wells and pillars
WQ60245 is a four-piece wheel well accent, one inch wide. PP60245 and PP60246 are four- and six-piece pillar post kits.
What it is
A strip of mirror-polished steel bonded to the rear bumper cover. It is a cosmetic accent, and the bumper is left as it is.
Steel and finish
26-gauge 304 stainless with a mirror polish. There is no plating on the surface to chip, peel, or fade.
Mounting
3M automotive-grade acrylic foam tape is applied to the back at the factory. The accent goes over the existing surface. QAA states the tape will hold for a lifetime without causing damage to the vehicle surface.
Coated paint
If your CT4 has a ceramic coating or sealant, the tape needs a clean, uncoated patch of clear coat. Clear the area where the accent will sit, then wash, dry, and wipe with a residue-free cleaner.
Fitting it
Dry-fit with the liner on and match the position in the photos. Measure from each end to the bumper corners, adjust until equal, and mark with painter's tape. On a dry, mild day, peel the liner and press firmly from the center outward. Wait a few days before washing. The Installation tab has the full process.
Care
Mild soap, water, and a soft towel. Leave abrasive pads and cutting compounds off the polished face.
Before ordering
Confirm the sedan and year, and decide whether you want the deck accent at the same time so the rear can be done in one session.
Part details
SKU RB60245, UPC 691821382507. To choose between the two rocker kits, call Quality Automotive Trims at 877-752-3811.
RB60245 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RB60245 |
| UPC | 691821382507 |
| Part type | Rear Bumper Trim Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2020-2026 Cadillac CT4 |
Fitment: RB60245
| Vehicle | Years | Body style |
|---|---|---|
| Cadillac CT4 | 2020-2026 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2020-2026 Cadillac CT4
- GC60245: 1-piece Gas Door Cover Trim
- LP60245: 1-piece License Plate Bezel
- PP60245: 4-piece Pillar Post Trim
- PP60246: 6-piece Pillar Post Trim
- RD60245: 1-piece Rear Bumper Accent
- TH60245: 4-piece Rocker Panel Trim, Lower Kit
- TH60246: 4-piece Rocker Panel Trim, Lower Kit
- WQ60245: 4-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Bumper Trim Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RB60245 Rear Bumper Trim Accent
Which Cadillac does RB60245 fit?
The Cadillac CT4 4-door sedan, 2020 through 2026.
How many pieces?
One.
What rear trim pairs with it?
RD60245 rear bumper accent, LP60245 license plate bezel, and GC60245 gas door cover.
How do TH60245 and TH60246 differ?
TH60245 is 2.2 to 3 inches wide from the bottom of the door up; TH60246 is 1.6 to 2.2 inches from the under door.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface.
