Product Description
Ford Explorer 2002-2006 Rear Liftgate Accent, Polished Stainless (RD44330)
RD44330 is a one-piece rear accent for the Ford Explorer 4-door SUV, model years 2002 through 2006. It is mirror-polished 304 stainless steel, made in the USA, and it attaches over the existing surface with 3M tape. The accent is listed for the 2002-2006 Explorer as a 4-door SUV.
The "Lower" note
One of the product bullets reads simply "Lower." The catalog does not explain it. It may describe where the strip sits on the back of the Explorer, but the data does not say, so do not assume. Look at the photos, and call before ordering if you want to know exactly where it goes.
Five Explorer years
2002, 2003, 2004, 2005, and 2006, SUV body. Confirm your year on the registration or door jamb label.
Size
No width or length is published for this accent. The photos are your reference for both.
A standalone listing
No other QAA parts are linked to this Explorer in the data. If you want more trim for the vehicle, a call is the quickest way to find out what else is available.
What a rear accent is
QAA files the part as rear deck accent. On an SUV like the Explorer it goes on the liftgate. It is a decorative strip of bright metal; it does not replace a factory part.
Material
26-gauge 304 stainless steel. The mirror look is polished into the metal, with no plating on top that could flake.
Mounting
The Explorer accent goes on with 3M automotive-grade acrylic foam tape, which QAA states will hold for a lifetime without causing harm to the Ford SUV.
Preparing a gate of this age
An Explorer from these years has had a long working life. Wash the liftgate, dry it, and look carefully at the paint in daylight. Wipe the strip's area with a residue-free cleaner until the cloth stays clean. Repair chips or worn clearcoat before installing, since tape bonds to the top layer of paint.
Placing it
Hold the strip against the gate with the liner on and match the photos closely, given the unexplained "Lower" note. Measure from each end to the gate edges, adjust until equal, and mark with painter's tape. Close the gate and step back to check.
Pressing it on
On a dry, mild day, peel the liner and press from the center to each end with firm, even pressure. The Installation tab has the full steps.
Care
Wait a few days to wash. Mild soap and a soft cloth; no abrasive pads or compounds. Dry the gate after rinsing.
Why stainless
Polished 304 stainless needs no coating to shine, so a light scuff shows the same metal underneath. That makes it a forgiving finish on a gate that gets used every day.
Before ordering
Confirm the year range and SUV body, and settle the placement question by phone if the photos do not answer it.
Part details
SKU RD44330, UPC 691821290789. Call Quality Automotive Trims at 877-752-3811 to confirm placement on your Explorer.
RD44330 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD44330 |
| UPC | 691821290789 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2002-2006 Ford Explorer |
Fitment: RD44330
| Vehicle | Years | Body style |
|---|---|---|
| Ford Explorer | 2002-2006 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD44330 Rear Deck Accent
Which Explorer does RD44330 fit?
The Ford Explorer 4-door SUV, 2002 through 2006.
What does "Lower" mean?
The catalog does not explain it. Check the photos or call.
How wide is it?
No width is listed.
Are there matching parts?
None are linked in the data for this listing.
How does it mount?
With 3M automotive-grade acrylic foam tape.
