Product Description
Honda CR-V 2017-2022 Liftgate Accent with Trim Crease, 1.75-Inch Stainless (RD17235)
RD17235 is a one-piece rear accent for the Honda CR-V 4-door SUV, model years 2017 through 2022. Two details set it apart in the data: a width of 1.75 inches and a note that says "with trim crease." It is polished 304 stainless steel, made in the USA, mounted with 3M tape.
What "with trim crease" tells you
The listing says the strip has a trim crease, which suggests it is shaped to follow a line on the gate rather than being a plain flat band. The catalog does not explain the shape further, so the photos are the best way to see where that crease runs and how it lines up on the liftgate.
A wide strip for the gate
A quarter inch shy of two inches, it is a substantial accent. QAA files it as a rear deck accent; on the CR-V it belongs on the liftgate. No length is listed.
Six model years
2017, 2018, 2019, 2020, 2021, and 2022, SUV body.
Four linked parts
- LB17235, a license bar above the plate
- PP17235, a four-piece pillar kit
- PP17236, a six-piece pillar kit
- TH17235, a six-piece rocker insert kit, a check mark insert that fits inside the indentation in the plastic lower area
The check mark rocker
TH17235 is a different kind of rocker trim: instead of covering the bottom of the doors, the listing says it fits inside an indentation in the plastic lower area. If you are building a full look, its photos are worth comparing with this liftgate strip.
Material
26-gauge 304 stainless, mirror polished. There is no plating on the surface.
Mounting
The CR-V accent goes over the existing surface with 3M automotive-grade acrylic foam tape. QAA says that tape will hold for a lifetime without harming the Honda.
Prep for a creased piece
Wash and dry the gate thoroughly, then wipe the full footprint with a residue-free cleaner. With a formed piece, a dry-fit matters even more, because the crease has to sit where it was meant to.
Placing it
Hold it in position with the liner on and compare carefully to the photos, watching how the crease lines up. Measure from each end to the edges of the gate and mark with painter's tape. On a dry, mild day, peel the liner and press from the center outward, working along both edges of the strip. The Installation tab has full steps.
Pairing with the license bar
LB17235 sits above the plate. Install this accent first, then center the license bar below it.
Care
Wait a few days to wash. Mild soap and a soft cloth from then on; no abrasive pads. Dry the gate after rinsing so the mirror face stays spot-free.
Before ordering
Confirm the year falls between 2017 and 2022 and that the trim crease on the strip matches what you see on your liftgate in the photos. If the shape looks different from your vehicle, call before buying; that is quicker than a return trip to the mailbox.
Part details
RD17235 has UPC 840251604776. If you have a question about the trim crease or fit, Quality Automotive Trims is at 877-752-3811.
RD17235 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD17235 |
| UPC | 840251604776 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.75" |
| Coverage / notes | With trim crease |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2017-2022 Honda CR-V |
Fitment: RD17235
| Vehicle | Years | Body style |
|---|---|---|
| Honda CR-V | 2017-2022 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2017-2022 Honda CR-V
- PP17235: 4-piece Pillar Post Trim
- PP17236: 6-piece Pillar Post Trim
- TH17235: 6-piece Rocker Panel Trim, Insert Kit
- LB17235: 1-piece License Plate Bar Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD17235 Rear Deck Accent
Which CR-V fits RD17235?
The Honda CR-V 4-door SUV, model years 2017 through 2022.
How wide is it?
1.75 inches, with a trim crease.
What does the trim crease mean?
The listing notes the strip has a trim crease; the photos show how it is shaped.
Is there a matching license bar?
Yes, LB17235.
How does it mount?
With 3M automotive-grade acrylic foam tape over the existing surface.
