Product Description
Honda CR-V 2017-2022 Check Mark Insert Trim for the Lower Indentation, Six Pieces (TH17235)
TH17235 isn't a straight strip. QAA describes it as "check mark insert trim" that "fits inside indentation in plastic lower area." It's a six-piece Insert Kit in polished stainless steel for the Honda CR-V SUV, model years 2017 through 2022.
What the notes tell you
Two short phrases carry the whole description. "Check mark" describes the shape of the inserts. "Fits inside indentation in plastic lower area" tells you where they go: into a recessed area on a plastic lower section of the CR-V's sides, rather than onto flat paint. The record doesn't give a width, piece lengths, or a breakdown of which piece fits which indentation. The product photos are the best guide to the shapes.
Check your CR-V first
Because the trim is made to sit inside an indentation, the important thing is that your CR-V's lower plastic area has the recess these pieces are shaped for. Compare it with the photos before ordering. If you're unsure, call Quality Automotive Trims at 877-752-3811 with your model year.
Fitment
Honda CR-V, 4-door SUV: 2017, 2018, 2019, 2020, 2021 and 2022.
Steel and tape
The six CR-V check mark inserts fit inside the indentation in the plastic lower area; QAA cuts them in the USA from polished 26 gauge 304 stainless and sets them with 3M automotive-grade acrylic foam tape. QAA states that tape will hold for a lifetime without harm.
Preparing plastic
Plastic trim often carries dressing or shine products that keep tape from bonding. Wash the indentations with soapy water and a soft brush, rinse, and dry. Then wipe inside each recess thoroughly with isopropyl alcohol, repeating with a clean cloth until no residue comes off. Let it dry completely.
Fitting six check marks
Lay all six pieces out and match each to an indentation by shape. Hold each in its recess with the liner on and check that it sits evenly, without riding up on an edge. Label each one with painter's tape so you don't mix them up.
Pressing in
Peel the liner, set the piece into its recess starting at the point of the check mark, and press outward along both arms. Go over each insert again with firm, even pressure, especially at the tips.
After installing
Wait about a day before washing. When you dress the plastic later, keep the product off the steel and away from the inserts' edges.
Supplies
Soapy water, a soft detail brush for the recesses, isopropyl alcohol, lint-free cloths and painter's tape for labels. Nothing has to come off the SUV.
Linked CR-V parts
PP17235 and PP17236 pillar kits, LB17235 license bar, and RD17235 deck accent w1.75 with trim crease. Check each listing for its finish.
Care
Rinse the lower sides after salty roads. Mild soap and a soft cloth clean the steel; a non-abrasive polish handles spots.
Questions about whether your CR-V's lower area matches? Call Quality Automotive Trims at 877-752-3811. SKU TH17235, UPC 840251604752.
TH17235 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH17235 |
| UPC | 840251604752 |
| Part type | Rocker Panel Trim, Insert Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Check mark insert trim; Fits inside indentation in plastic lower area |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2017-2022 Honda CR-V |
Fitment: TH17235
| Vehicle | Years | Body style |
|---|---|---|
| Honda CR-V | 2017-2022 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2017-2022 Honda CR-V
- PP17235: 4-piece Pillar Post Trim
- PP17236: 6-piece Pillar Post Trim
- LB17235: 1-piece License Plate Bar Accent
- RD17235: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Insert Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH17235 Rocker Panel Trim, Insert Kit
Where does TH17235 go?
Inside the indentation in the plastic lower area, per QAA's note.
What shape are the pieces?
QAA calls them check mark insert trim. The photos show the shape.
How wide are they?
The record doesn't list a width.
Which CR-V years fit?
2017 through 2022.
How do they attach?
3M automotive-grade acrylic foam tape. Call 877-752-3811 with questions.
