Product Description
Ford Explorer 2020-2024 Five-Piece License Bar with "EXPLORER" Cutout (LB60330)
Five pieces is a lot for a license bar, and LB60330 is built around the lettering. Its catalog note reads Included "EXPLORER" cutout. It fits the Ford Explorer 4-door SUV, model years 2020 through 2024, and it is cataloged as License Bar, Above plate accent Trim.
Why five pieces?
The catalog gives the count and the cutout note but doesn't say how the five pieces are divided or arranged. We won't describe a layout the data doesn't give. The product photos show exactly how the five pieces go together on the liftgate. Use them as the map, and if your liftgate looks different, call Quality Automotive Trims at 877-752-3811 and mention LB60330 before ordering.
Material and mount
For the 2020-2024 Explorer, all five pieces are mirror-polished 26-gauge 304 stainless steel, made in the USA. Each is held by 3M automotive-grade acrylic foam tape over the existing surface, with no drilling. According to QAA, the tape will hold for a lifetime and won't damage the Ford's surface.
Lettering check
The EXPLORER cutout assumes the lettering is on your liftgate in its original position. If it's been removed, replaced with something else, or moved, the cutout won't line up. Look before you order.
Installing five pieces
This takes more patience than a single bar. Wash, dry and alcohol-wipe the whole area, working carefully around each letter, where wax builds up. Lay out all five pieces on a towel in the order shown in the photos. Dry-fit them with liners on, one at a time, checking that the lettering sits evenly in the cutout. When the layout looks right from behind the vehicle, mark each piece's ends with painter's tape. Then install them one by one, pressing each firmly along its length and around the edges near the letters. Press all five again once they're on. Close the liftgate gently for the first day. The Installation tab lists the temperature range.
Confirming the year
The fitment row lists five model years, 2020 to 2024, for the 4-door SUV. First, check your Explorer's year against that range. If your Explorer is outside that range, this isn't the part for it, and the catalog gives no cross-reference.
Keep the pieces sorted
With five parts that look similar, it's easy to mix them up. Leave each on its backing until you need it, and number them lightly on the liner with a marker in the order the photos show. That small step saves time at the car.
Paint check
Look for chips or old adhesive around the lettering and clear them first.
The lettering insert
The only other part on this sheet is SGR60331, an eight-piece EXPLORER rear hatch letter insert. The catalog doesn't say how it relates to this bar's cutout, or whether the two are meant to be used together. Compare both listings' photos, and if you're considering both, call us so we can check them against each other.
Care
Mild soap, water and a soft towel. Avoid scouring pads.
LB60330 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB60330 |
| UPC | 691821306107 |
| Part type | License Bar, Above plate accent Trim |
| Pieces in kit | 5 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Included "EXPLORER" cutout |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2020-2024 Ford Explorer |
Fitment: LB60330
| Vehicle | Years | Body style |
|---|---|---|
| Ford Explorer | 2020-2024 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2020-2024 Ford Explorer
- SGR60331: 8-piece EXPLORER Rear Hatch Letter Insert
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Bar, Above plate accent Trim
- Unpack all 5 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB60330 License Bar, Above plate accent Trim
How many pieces is LB60330?
Five.
Does it work around the EXPLORER lettering?
Yes. The catalog notes Included "EXPLORER" cutout.
Which years does it fit?
2020 through 2024 Ford Explorer, 4-door SUV.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Can I use it with SGR60331?
The catalog doesn't say. Compare both listings' photos or call 877-752-3811.
