Product Description
TH55303: F-150 2015-2020 Super Cab 6.5 Bed Upper Kit With Cut-Out for the Side Sensor Under the Mirrors
The note on TH55303 reads "With Cut out for side sensor under mirrors." That cut-out is what sets it apart. Otherwise it's a twelve-piece polished stainless steel Upper Kit, 4.5" wide, for the 2015-2020 Ford F-150 4-door Super Cab pickup with the 6.5 bed.
Do you need the cut-out?
Stand beside the front door and look low on the body under the mirror. The record describes a "side sensor" there but doesn't name the sensor type or the trims that have it. If you see one, this kit is shaped to clear it. If you don't, the twin listing TH55302 has the same width and count with no cut-out note. Unsure? Send a photo to 877-752-3811.
The coverage
Each piece starts at the bottom of the side molding and runs down 4.5". Where exactly the cut-out falls on its piece is shown in the photos, not in the record, so compare them with your truck.
Why polished 304
The twelve Super Cab 6.5 bed pieces, sensor cut out included, are USA-made polished 26 gauge 304 stainless on 3M automotive-grade acrylic foam tape. Per QAA, it will hold for a lifetime without damaging the F-150.
Around the sensor
Clean the area near the sensor gently with a soft cloth rather than a stiff brush. During the dry fit, make sure the cut-out leaves the sensor fully uncovered and that no edge of the steel sits over it. If it doesn't line up, stop and call us before peeling any liner.
Same-truck partners
- MI55302: twelve-piece molding insert kit, 1.5", listed for the Super Cab with the 6.5' bed, noted "Upper"
- WS55302: four-piece window sill set for the Super Cab
- MC55307 / MC55307B: mirror covers for the top half, "For non-painted mirror"; MC55307B is gloss black plated ABS plastic
Read each listing for its own finish and notes.
Other sensor kits
Crew Cab trucks have cut-out versions too: TH55306 for the 6.5 bed and TH55317 for the 5.5 bed.
Setup
Wash, rinse and dry everything below the molding. Wipe it with isopropyl alcohol. Lay the twelve pieces out by position from the photos, and find the cut-out pieces first so you can use them to set the front of the run.
Fitting
Tape every piece up dry. Once the cut-out sits correctly around the sensor, set that piece first and build the row back from it. Peel in short sections and press firmly as you go.
Weather
Mild, dry and shaded is ideal. Keep water off the trim for a day afterward.
Before ordering
Confirm three things: the cab (4-door Super Cab), the bed (6.5), and whether there is a sensor under each mirror. All three have to match this record. If one does not, the linked list includes kits for other cabs and beds, and a quick call to 877-752-3811 with a photo of the lower front door will point you to the right one. Ordering the kit that matches the first time saves a return.
Sensor questions on F-150 kit TH55303 (UPC 691821706099) go to 877-752-3811.
TH55303 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH55303 |
| UPC | 691821706099 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 12 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4.5" |
| Coverage / notes | With Cut out for side sensor under mirrors; Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2015-2020 Ford F-150 |
Fitment: TH55303
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-150 | 2015-2020 | 4-door, Pickup Truck, Super Cab, 6.5 bed |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2015-2020 Ford F-150
- GC55308: 1-piece Gas Door Cover Trim
- MC55307: 2-piece Mirror Cover Set
- MI55302: 12-piece Body Molding Insert Trim Kit
- MI55305: 12-piece Body Molding Insert Trim Kit
- MI55316: 12-piece Body Molding Insert Trim Kit
- RT55309: 1-piece Tailgate Accent Trim
- TGI55308: 1-piece Tailgate Insert Trim
- TH55302: 12-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 12 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH55303 Rocker Panel Trim, Upper Kit
What does the cut-out on TH55303 clear?
The record says "side sensor under mirrors." It doesn't name the sensor type.
My truck has no sensor there. Which kit?
TH55302 is the same cab, bed, width and count without a cut-out note.
Which F-150 is this for?
2015-2020, 4-door Super Cab pickup with the 6.5 bed.
How many pieces and how wide?
Twelve pieces, 4.5" wide.
