Product Description
Ford F-150 2015-2020 Super Cab, 6.5 Bed: TH55302 12-Piece Stainless Upper Kit Without the Sensor Cut-Out
TH55302 covers the 2015-2020 Ford F-150 4-door Super Cab pickup with the 6.5 bed. It's twelve pieces of polished stainless steel, 4.5" wide, spanning "from the bottom of the molding DOWN to the specified width."
Plain or cut-out?
For this exact cab and bed, QAA lists two Upper Kits. TH55303 carries the note "With Cut out for side sensor under mirrors." TH55302's record has no such note. Both have the same width and piece count, so the cut-out is the whole difference in the data. Look under the mirrors on your truck. If there's a sensor there, TH55303 is the listing that names one; if you can't tell, a photo to 877-752-3811 settles it.
Molding inserts built for the same truck
MI55302, a twelve-piece body molding insert kit at 1.5", is listed for the same Super Cab with the 6.5' bed and shares this kit's number. Its note reads "Upper." The record doesn't say how the insert and this rocker kit sit relative to each other, so check both sets of photos if you plan to run them together.
Window sill set
WS55302, a four-piece window sill set, is listed for the 4-door Super Cab. Check that listing for its finish.
The steel
For the 2015-2020 F-150 Super Cab 6.5 bed, QAA forms twelve 4.5" pieces in the USA out of polished 26 gauge 304 stainless, carried below the molding on 3M automotive-grade acrylic foam tape. According to QAA, it will hold for a lifetime without harming the truck.
Other beds and cabs
Super Cab owners with the 5.5 bed should look at TH55300, and the 8' bed at TH55313. Crew Cab and Regular Cab trucks have their own kits.
Measuring before you buy
Run painter's tape along the bottom of the side molding, then mark 4.5" below it at a few points along the cab and bed. That band is the area the kit covers. If a step bar or mud flap sits inside it, call us before ordering.
Getting the surface ready
- Wash and rinse the lower body below the molding
- Dry it fully, including the seam under the molding
- Wipe with isopropyl alcohol just before fitting
Order of work
Sort the twelve pieces by position using the photos. Tape each one up dry. When the line looks right from the front corner of the truck, peel and press the first piece, then work rearward one piece at a time.
Door-gap spacing
Measure where the first pieces start and end against the door gaps and use those figures for the rest.
What the record leaves out
The data gives the width and the starting line, but not the length of each piece or how the twelve divide between the cab doors and the bed. The product photos show the layout. If your truck has had body work low on the sides, or the molding has been replaced, mention it when you call so we can check the starting line is where the kit expects.
Call 877-752-3811 with your cab, bed and a photo under the mirror. Quality Automotive Trims, SKU TH55302, UPC 691821585021.
TH55302 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH55302 |
| UPC | 691821585021 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 12 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4.5" |
| Coverage / notes | Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2015-2020 Ford F-150 |
Fitment: TH55302
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-150 | 2015-2020 | 4-door, Pickup Truck, Super Cab, 6.5 bed |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2015-2020 Ford F-150
- GC55308: 1-piece Gas Door Cover Trim
- MC55307: 2-piece Mirror Cover Set
- MI55302: 12-piece Body Molding Insert Trim Kit
- MI55305: 12-piece Body Molding Insert Trim Kit
- MI55316: 12-piece Body Molding Insert Trim Kit
- RT55309: 1-piece Tailgate Accent Trim
- TGI55308: 1-piece Tailgate Insert Trim
- TH55305: 12-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 12 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH55302 Rocker Panel Trim, Upper Kit
What's the difference between TH55302 and TH55303?
TH55303 is noted "With Cut out for side sensor under mirrors." TH55302 has no cut-out note.
Which insert kit is listed for the same truck?
MI55302, twelve pieces at 1.5", for the Super Cab with the 6.5' bed.
How wide is TH55302?
4.5", from the bottom of the molding down.
How many pieces?
Twelve.
