Product Description
TH92905 BMW 3 Series 1992-1995 Sedan Full Rocker Kit, 6.25", Within the Wheel Wells, 6 Pieces
For the 1992-1995 BMW 3 Series 4-door sedan, TH92905 is a six-piece Full Kit in polished stainless steel. The bullet reads "6.25" Width, does not extend past wheel wells," and it "Spans from the bottom of the molding to the bottom of the door."
The only sedan kit linked
The two linked 3 Series kits, TH92900 and TH92901, are both tagged 2-door coupe. This is the one listing in the group for the sedan. There's no sedan version of the eight-piece "with rear, rear trim" kit in the record.
Six pieces, four doors
Six pieces for four doors don't split evenly, and the record doesn't list positions. The coupe kit has the same count on two doors. Sort the pieces carefully with this listing's photos, not the coupe's, and label each liner with its position.
Within the wheel wells
The note keeps the coverage between the front and rear wheel wells. The trim fills the height from the molding to the door bottom along that stretch.
Material
The BMW 3 Series pieces are polished 26 gauge 304 stainless, made in the USA by QAA, and fit over the existing paint with 3M automotive-grade acrylic foam tape. Per QAA, the tape will hold for a lifetime without causing damage to the sedan.
Measuring
Measure from the molding to the bottom of each door, front and rear, on all four doors. Compare with 6.25". Send us any reading that stands apart, and mention any replaced door or molding.
Preparing
Check the molding on every door; it has to be straight and secure, since each piece's top edge meets it. Wash and rinse below it, strip wax with a wax-and-grease remover, repair chips or rust, and wipe with isopropyl alcohol just before fitting.
Dry fit
Tape each piece up with painter's tape between the molding and the door bottom. Check the ends at the door gaps and near the wheel wells, and open all four doors.
Bonding
Peel a little liner at a time, press, and finish each piece with firm pressure.
Matching
Hold the 3 Series spacing consistent from piece to piece.
Conditions
Mild and dry, in shade. Wait a day before washing.
Don't mix coupe and sedan
The coupe kits share the 6.25" width, and one shares the six-piece count, so they can look alike in a listing. They are tagged for a different body, though, and the record doesn't say the pieces are interchangeable. Order this sedan listing for a 4-door car.
One door first
Fit a single door completely, step back and look along the side from the front and rear, then carry on. It is far easier to reposition a piece while its liner is still on. Keep the box until every piece is on.
While sorting the six BMW pieces, rest them on a soft towel to keep the polished faces free of marks.
Have your BMW year ready when you call 877-752-3811 about TH92905, UPC 691821340057.
TH92905 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH92905 |
| UPC | 691821340057 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6.25" |
| Coverage / notes | Does not extend past wheel wells; Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1992-1995 BMW 3 Series |
Fitment: TH92905
| Vehicle | Years | Body style |
|---|---|---|
| BMW 3 Series | 1992-1995 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1992-1995 BMW 3 Series
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH92905 Rocker Panel Trim, Full Kit
Which BMW does TH92905 fit?
The 1992-1995 BMW 3 Series 4-door sedan.
Does it extend past the wheel wells?
No, per the note.
How wide is it?
6.25", molding to door bottom.
How many pieces?
Six.
