Product Description
Jeep Cherokee 2-Door 1984-1998 Full Rocker Kit, No Molding, 5.5", Eight Pieces (TH17075)
TH17075 is an eight-piece Full Kit in polished stainless steel for the two-door Jeep Cherokee SUV, model years 1984 through 1998. Its width bullet says "5.5" Width, No Molding," and that phrase is the key to choosing it: this is the version for a Cherokee without body side molding.
No Molding, but a note that mentions one
The placement note reads "Spans from the bottom of the molding to the bottom of the door," the same wording QAA uses on its molded versions. On a kit marked "No Molding," that leaves the top reference point unclear. The 5.5" width tells you how tall each piece is. The photos show where the pieces sit, and Quality Automotive Trims can confirm the placement at 877-752-3811.
With or without molding
QAA catalogs a separate two-door Cherokee kit marked "With Molding," at about three inches wide, that isn't linked to this listing. If your Cherokee still has its side molding, that's the one to ask about. If the molding is gone, or was never there, this 5.5" kit is the listed choice.
Fitment
Jeep Cherokee, 2-door SUV, 1984 through 1998. It isn't listed for the four-door body; QAA catalogs that separately.
Eight pieces on a two-door
How the eight Cherokee pieces are laid out isn't in the record. Lay them out against the photos before starting and number each one with painter's tape.
Material and tape
The eight Cherokee pieces are polished 26 gauge 304 stainless steel produced in the USA, fixed over the existing surface with 3M automotive-grade acrylic foam tape. Per QAA, that tape will hold for a lifetime without causing damage to the Jeep.
Older paint needs more attention
On an SUV this age, check the lower body for years of wax, touch-up paint, or chalky, oxidized clear. Tape bonds to the top layer, so that layer has to be sound. Wash, rinse and dry, then wipe with isopropyl alcohol. If the paint is flaking or the panel has rust bubbles or filler that's cracking, fix that first; the trim won't hold onto a failing surface.
Fitting
Dry-fit a whole side, liners on. Check that the top edges form one line, the joints look even, and the doors open without catching. Then peel and press one piece at a time, pressing across the full 5.5" height.
No linked parts
This listing has no related Cherokee parts attached, so there's nothing to coordinate on the sheet. If you're dressing up other areas of an older Cherokee, call and ask what QAA carries.
Planning the job
Eight large pieces plus careful prep on older paint can easily take a few hours, so don't start late in the day. Have a helper hold pieces while you judge the line from a few steps back.
Afterward
Leave it about a day before washing, and install in warm, dry conditions.
Care
Rinse off salt and mud, and use a non-abrasive polish on the steel.
For the eight 5.5-inch Cherokee pieces, TH17075 (UPC 691821326709), call 877-752-3811.
TH17075 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH17075 |
| UPC | 691821326709 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5.5" |
| Coverage / notes | No Molding; Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1984-1998 Jeep Cherokee |
Fitment: TH17075
| Vehicle | Years | Body style |
|---|---|---|
| Jeep Cherokee | 1984-1998 | 2-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH17075 Rocker Panel Trim, Full Kit
Is TH17075 for a Cherokee with or without molding?
Without. The width bullet says "No Molding."
How tall is it?
5.5".
Does it fit the four-door Cherokee?
No, it's listed for the 2-door, 1984 through 1998.
Why does the note mention the molding?
The record uses the same wording as the molded version. Call 877-752-3811 to confirm placement.
How many pieces?
Eight.
