Product Description
Eight-Piece 5.625" Rocker Kit for the 1993-1995 Jeep Grand Cherokee (TH33083)
TH33083 is an eight-piece polished stainless steel Full Kit for the 1993-1995 Jeep Grand Cherokee 4-door SUV. Its width is 5.625" and its only span note is "Spans from the bottom of the molding to the bottom of the door." It has no full-length note and no trim restriction.
Where it sits among the linked kits
TH33080 is the twelve-piece version at the same width, and its record lists full-length coverage from the wheel wells to the bumpers. TH33085 is another eight-piece kit, listed at a 5.5-5.75" range and tagged "Base Model only." So TH33083 is the eight-piece kit with a single fixed width and no Base Model tag. The data doesn't explain how it differs physically from TH33085. If you own a Base Model, look at both and call 877-752-3811.
What "no full-length note" means
We can only say what the record states. It describes the steel filling the band from the molding to the door bottom. It doesn't mention coverage past the wheels the way TH33080 does. The product photos show the layout.
Measure
Five and five-eighths inches from under the molding to the bottom of the door is the figure to compare with your own Grand Cherokee. Measure front and rear doors.
Construction
For the 1993-1995 Grand Cherokee, the eight pieces are polished 26 gauge 304 stainless from the USA, bonded over the existing surface with 3M automotive-grade acrylic foam tape. QAA says the tape will hold for a lifetime without damaging the Jeep.
Eight pieces
Two per door is one reading of eight pieces on a four-door SUV, but the record doesn't confirm it. Check against the photos and label each liner.
Cleaning
Wash off the road film, dry, then wipe with isopropyl alcohol. Get into the corner under the molding where wax collects. A painter's tape pull test tells you whether old paint will hold.
Mounting
- Dry-fit, liner on.
- Peel back a short length at the front.
- Tuck the top under the molding, press.
- Continue along the piece, pulling the liner as you go.
- Close the door and check clearance.
Molding
Make sure it's firmly attached along its run before you start. The top edge of each piece follows it, so a lifted end or a wavy stretch will show in the steel.
Choosing between three kits
Open all three listings and compare the photos. Decide first whether you want coverage past the wheels (TH33080), then check whether your SUV is a Base Model (TH33085). If neither applies, TH33083 is the record that fits the description. We're happy to talk it through by phone if the photos leave questions.
Even Grand Cherokee joints
Keep the Grand Cherokee piece positions consistent.
Supplies
Gather soap, alcohol, cloths, painter's tape, a tape measure and a plastic tool before starting on the Grand Cherokee.
Conditions
Dry and mild for the install, then about a day before the first wash. Use only non-abrasive polish on the steel.
Grand Cherokee owners with set TH33083 (UPC 691821717316) can ring 877-752-3811.
TH33083 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH33083 |
| UPC | 691821717316 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5.625" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1993-1995 Jeep Grand Cherokee |
Fitment: TH33083
| Vehicle | Years | Body style |
|---|---|---|
| Jeep Grand Cherokee | 1993-1995 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1993-1995 Jeep Grand Cherokee
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH33083 Rocker Panel Trim, Full Kit
Is TH33083 full length?
The record has no full length note. TH33080 is the full length kit.
Is it for the Base Model?
It has no trim tag. TH33085 is tagged Base Model only. Call 877-752-3811 if unsure.
How many pieces?
Eight.
How tall?
5.625".
