Product Description
Jeep Grand Cherokee 1993-1995 Full-Length Rocker Kit, 12 Pieces, 5.625" (TH33080)
TH33080 is the full-length option among three linked rocker kits for the 1993-1995 Jeep Grand Cherokee. It's twelve pieces of polished stainless steel at 5.625", with the notes "Full Length, Includes coverage from the wheel well to the bumper on the front and rear" and "Spans from the bottom of the molding to the bottom of the door." In short: molding to door bottom in height, and bumper to bumper in length.
Three Grand Cherokee kits, side by side
- TH33080 (this kit): twelve pieces, 5.625", full length to the bumpers
- TH33083: eight pieces, 5.625", no full-length note
- TH33085: eight pieces, 5.5-5.75", tagged "Base Model only"
If you want steel beyond the wheels, this is the record that says so. TH33083 and TH33085 have no such note. The Base Model tag on TH33085 is the other thing to check. TH33080 carries no trim restriction in its fitment, but if your SUV is a Base Model and you're unsure which kit suits it, call 877-752-3811.
Fitment
Jeep Grand Cherokee, 4-door SUV, 1993, 1994 and 1995.
Material
This full-length Grand Cherokee kit runs twelve pieces, each cut by QAA in the USA from polished 26 gauge 304 stainless and pressed onto the existing body with 3M automotive-grade acrylic foam tape. Per QAA, that tape will hold for a lifetime and leaves the 1993-1995 Jeep unharmed.
Laying out twelve
The record doesn't spell out positions. Arrange the pieces front to back, with the end sections at either end, and confirm each against the product photos. Number the liners.
Beyond the doors
The end pieces sit between the wheel openings and the bumpers. Clean those areas as carefully as the doors; road tar and grit gather there. Dry-fit the end pieces and make sure they sit flat before peeling any liner.
Height check
Measure from the molding's underside to the bottom of a door: five and five-eighths inches is the record's figure.
Prep
Wash the lower sides, dry, and wipe the whole band with isopropyl alcohol. Test older paint with a strip of painter's tape and repair anything that lifts.
Order of install
Start on the doors, using the molding and door bottom as guides, then fit the end pieces, matching their top edges to the door pieces. Check joints from a few steps back before pressing them down.
Doors
Open and close each door slowly after the pieces on either side of its gaps are on.
The rest of the kit
Measure joint positions from the wheel openings and copy them.
Supplies
Soap, isopropyl alcohol, lint-free cloths, painter's tape, a tape measure, a plastic tool, and a helper.
Install day
Allow an afternoon of mild, dry weather, and keep the parts indoors beforehand so the tape is at a comfortable temperature. Give the tape a day before washing. After that, mild soap and an occasional non-abrasive polish are all the steel needs; stiff brushes and harsh wheel cleaners should stay off it.
Questions about which Grand Cherokee kit to choose? Quality Automotive Trims, 877-752-3811. SKU TH33080, UPC 691821429899.
TH33080 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH33080 |
| UPC | 691821429899 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 12 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5.625" |
| Coverage / notes | Full Length, Includes coverage from the wheel well to the bumper on the front and rear; Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1993-1995 Jeep Grand Cherokee |
Fitment: TH33080
| Vehicle | Years | Body style |
|---|---|---|
| Jeep Grand Cherokee | 1993-1995 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1993-1995 Jeep Grand Cherokee
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 12 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH33080 Rocker Panel Trim, Full Kit
Does TH33080 cover beyond the wheels?
Yes. It's listed as full length, wheel well to bumper on the front and rear.
How is it different from TH33083?
TH33083 is eight pieces at the same width with no full length note.
Which years?
1993-1995 Grand Cherokee.
How tall is it?
5.625".
