Product Description
Jeep Grand Cherokee 1993-1995 Base Model Rocker Kit, Eight Pieces, 5.5"-5.75" (TH33085)
TH33085 is the Grand Cherokee kit with a trim restriction. The fitment reads "4-door, SUV, Base Model only," 1993-1995. It's eight pieces of polished stainless steel, a Full Kit that "Spans from the bottom of the molding to the bottom of the door," and its width is given as a range: 5.5-5.75".
Base Model only
If your Grand Cherokee isn't a Base Model, this record doesn't cover it. The two linked kits, TH33080 (twelve pieces, full length) and TH33083 (eight pieces), carry no trim tag. The data doesn't say what differs on a Base Model, so check your paperwork for the trim and phone 877-752-3811 if you're unsure.
Why a width range?
The record lists 5.5" to 5.75" rather than one figure. It doesn't say whether the steel tapers along its length, or whether the range covers variation between doors. Measure your band from the molding to the door bottom at the front and rear of each door. If your readings fall in that range, that's consistent with the record; then compare the product photos for the shape. Call if the readings fall outside it.
Fitment
Jeep Grand Cherokee 1993-1995, 4-door SUV, Base Model only.
The steel
The eight Grand Cherokee Base Model pieces are polished 26 gauge 304 stainless steel made in the USA, attached over the existing surface with 3M automotive-grade acrylic foam tape. According to QAA, the tape will hold for a lifetime without damaging the 1993-1995 Jeep.
Sorting
The record doesn't give positions for the eight pieces. If the pieces vary in height, that variation is a clue to where each goes; compare with the photos and label them.
Preparation
Wash, dry and wipe with isopropyl alcohol until clean. Test older paint with painter's tape and fix any lifting before you start.
Fitting each piece
With the liner on, set the piece under the molding and check where its bottom edge lands relative to the door bottom. Once it sits correctly, peel, press and smooth. Close the door after each.
Molding condition
Press along it; a loose section will let the steel's top edge wander.
Consistent Grand Cherokee positions
Hold the Grand Cherokee positions consistent along the SUV.
Record your measurements
Before ordering, write down the molding-to-door-bottom distance at the front and rear of each door. Eight readings take a few minutes and tell you whether your SUV sits in the 5.5-5.75" range the record gives. Share them when you call and we can compare them against the product photos.
Confirming the trim
The Base Model tag is the deciding detail. Check the original paperwork or window sticker if you have it. If the trim can't be confirmed, call before buying rather than after.
Supplies
Base-model Jeep kit: soap, alcohol, lint-free cloths, painter's tape, tape measure, plastic tool.
Install conditions
Dry, mild day, out of direct sun; wait about a day before washing, and use only a non-abrasive polish on the steel after that.
Base-model Grand Cherokee set TH33085, UPC 691821279258: Quality Automotive Trims, 877-752-3811.
TH33085 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH33085 |
| UPC | 691821279258 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5.5" to 5.75" tapered |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1993-1995 Jeep Grand Cherokee |
Fitment: TH33085
| Vehicle | Years | Body style |
|---|---|---|
| Jeep Grand Cherokee | 1993-1995 | 4-door, SUV, Base Model only |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1993-1995 Jeep Grand Cherokee
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH33085 Rocker Panel Trim, Full Kit
Does TH33085 fit a Grand Cherokee that isn't a Base Model?
It's tagged Base Model only. TH33080 and TH33083 have no trim tag.
Why is the width 5.5-5.75"?
The record gives a range without explaining it. Measure your doors and call 877-752-3811.
How many pieces?
Eight.
Which years?
1993-1995.
