Product Description
TH94240 Honda Passport 1994-1997 4-Door with Flares Full Kit, 8.5", 8 Pieces
For the 1994-1997 Honda Passport, tagged "4-door, SUV, w/ Flares," TH94240 is an eight-piece Full Kit in polished stainless steel. The listed width is 8.5", and the kit "Spans from the bottom of the molding to the bottom of the door."
Two Passport kits, one word apart
The linked TH94241 is also an eight-piece Full Kit with flares in its tag, but its tag also says "w/ Molding" and its width is 6". This listing's tag doesn't mention molding at all, yet its placement note still measures from the molding. The record doesn't resolve that. Before ordering either one:
- Look at whether your Passport has a molding along the doors.
- Measure from the molding (if present) to the door bottom.
- Compare with 8.5" here and 6" on TH94241.
- Call 877-752-3811 with the figures and a photo.
We'll confirm which listing matches your truck.
A tall band
8.5" is a lot of height to cover, so the paint under each piece is a big area. Prepare it thoroughly: a soapy wash, a wax-and-grease remover over the whole band, repairs to any chips or rust, then an isopropyl alcohol wipe just before fitting.
Material
Honda's 1994-1997 Passport with flares gets eight 8.5" pieces cut in the USA from polished 26 gauge 304 stainless, set from molding to door bottom with 3M automotive-grade acrylic foam tape. QAA says that tape will hold for a lifetime and won't mark the SUV.
Eight pieces
The record doesn't list where each goes. Lay them out with the photos and label the liners before peeling.
Flares
Both Passport kits mention flares, so the record treats them as present on the trucks these kits fit. It doesn't describe how the pieces meet them. During the dry fit, check the ends of the pieces nearest the flares carefully.
Dry fit
Hold each piece with painter's tape so its top meets the upper edge you measured from and its bottom meets the door bottom. Open all four doors.
Bonding
Peel a few inches of liner, press across the full height, and continue. Go over the finished piece with firm pressure.
Passport pieces five to eight
Copy the spacing from the first Passport run.
Weather
A mild, dry day in shade; no washing for a day.
If there is no molding
The placement note uses the molding as the top edge, but this tag doesn't mention one. If your Passport has flares and no molding along the doors, tell us that when you call, and send a photo of the side; we will check what the top edge of these pieces is meant to meet before you order.
One door first
Fit a single door completely, then step back and look along the side from the front and rear before going on. With a band this tall, any tilt is easy to see, and easy to correct while the liner is still on.
Call 877-752-3811 with your year and measurements. Quality Automotive Trims, SKU TH94240, UPC 691821356089.
TH94240 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH94240 |
| UPC | 691821356089 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 8.5" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1994-1997 Honda Passport |
Fitment: TH94240
| Vehicle | Years | Body style |
|---|---|---|
| Honda Passport | 1994-1997 | 4-door, SUV, w/ Flares |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1994-1997 Honda Passport
- TH94241: 8-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH94240 Rocker Panel Trim, Full Kit
Which Passport does TH94240 fit?
The 1994-1997 Honda Passport 4-door SUV, tagged "w/ Flares."
How is it different from TH94241?
TH94241's tag also says "w/ Molding" and lists 6". Call 877-752-3811 to confirm yours.
How wide is it?
8.5".
How many pieces?
Eight.
