Product Description
Honda Passport 1994-1997 with Flares & Molding Full Kit TH94241, 6", 8 Pieces
TH94241 is an eight-piece polished stainless steel Full Kit for the 1994-1997 Honda Passport, tagged "4-door, SUV, w/ Flares, w/ Molding." It "Spans from the bottom of the molding to the bottom of the door," and the width is 6".
Flares and molding
This tag names both. If your Passport has flares and a molding along the doors, this is the listing whose tag says so. The other Passport kit, TH94240, is tagged with flares only and lists 8.5", two and a half inches more. The record doesn't explain the difference. You can check it on your own truck: measure from the molding to the door bottom and see which figure it's nearer.
Measuring
- Rigid ruler, square to the panel
- Measure down from the bottom of the Passport's molding to the door's lower edge
- At both ends of all four doors
- Compare with 6"
Send the readings to 877-752-3811 if they don't match.
The molding as an edge
Each piece's top edge meets the molding, so it must be firmly attached along every door. Repair any loose, cracked or missing sections before ordering.
Material
Each of the eight Passport pieces starts as polished 26 gauge 304 stainless steel in the USA and attaches between molding and door bottom with 3M automotive-grade acrylic foam tape. Per QAA, the tape will hold for a lifetime without harming the 1994-1997 Honda.
Eight pieces
Positions aren't in the record. Use the photos to sort them and mark each liner.
Near the flares
The record doesn't describe how the pieces sit next to the flares. Pay attention to the ends of the pieces closest to them during the dry fit, and stop to compare with the photos if anything looks off.
Prep
- Wash and rinse the Passport below its molding.
- Take off wax with a wax-and-grease remover.
- Touch in chips or rust.
- Finish the prep with an isopropyl alcohol wipe.
Fitting
Dry fit with painter's tape, open each door, then bond by peeling the liner a few inches at a time and pressing firmly.
Remaining Passport trim
Keep the Passport gaps even throughout.
Conditions
Shade, mild weather, no moisture; skip washing the Passport for a day.
Choosing between the two
Start with what is on your doors. A molding plus flares matches this tag. Flares without the molding wording matches the other listing, although its placement note still mentions a molding. If you are not sure which describes your truck, a photo of the whole side settles it quickly.
One door at a time
Fit one door completely and step back to check that the top edge sits evenly against the molding before moving on. Lay the pieces on a soft towel while sorting to keep the polished faces unmarked, and keep the box until every piece is on.
A replaced door or molding
If one door or its molding has been replaced, measure it separately; its reading can sit apart from the others. Tell us which door it is when you call.
Passport owners can call Quality Automotive Trims at 877-752-3811 with the year: SKU TH94241, UPC 691821692279.
TH94241 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH94241 |
| UPC | 691821692279 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1994-1997 Honda Passport |
Fitment: TH94241
| Vehicle | Years | Body style |
|---|---|---|
| Honda Passport | 1994-1997 | 4-door, SUV, w/ Flares, w/ Molding |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1994-1997 Honda Passport
- TH94240: 8-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH94241 Rocker Panel Trim, Full Kit
Which Passport does TH94241 fit?
The 1994-1997 Honda Passport 4-door SUV with flares & molding.
Where does it install?
From the bottom of the molding to the bottom of the door.
How wide is it?
6".
How many pieces?
Eight.
