Product Description
Chrysler Sebring Sedan 2007-2010 Roof Insert Trim, 2-Piece Stainless (RI47780)
RI47780 gives the Chrysler Sebring 4-door sedan, model years 2007 through 2010, a pair of polished stainless roof inserts. They're 26-gauge 304 stainless steel, mirror-polished and made in the USA.
Sedan only
The fitment record lists the 4-door sedan and nothing else. If your Sebring is a different body style, this listing doesn't include it, and you should call Quality Automotive Trims at 877-752-3811 before buying.
Size is not in the record
No width, no length, no placement notes. The product photos are the guide, and a measurement is a phone call away. For roof trim that runs most of the car's length, asking is worthwhile.
How they mount
Both pieces mount with 3M automotive-grade acrylic foam tape and install over the existing surface. Nothing is cut into the roof. QAA states the tape will hold for a lifetime without causing damage to the vehicle surface.
Three other Sebring parts
The record links a short list. RD47780 is a rear deck accent listed at 1.125 inches. LP47780 is a license plate bezel. GC47780 is a gas door cover noted for "two crease contours," a note the record doesn't explain further, so its photos are the reference. The data doesn't state those parts' materials; check each listing for its finish.
Roof and trunk together
The roof inserts run along the top, and the trunk accent sits at the rear. If you're considering both, look at photos of each to see how the lines relate when the car is viewed from a rear corner, which is where both are visible at once.
Paint check on an older sedan
Roof paint ages fastest. After washing and drying, inspect the tape area for chalky or flaking clearcoat. Tape needs a sound surface, so fix any problem spots first. Then clean each footprint with a residue-free cleaner, changing cloths until one comes back spotless.
Step-by-step
- Lay out both pieces with liners on and match them to the photos.
- Hold each in place and mark the ends with painter's tape.
- Measure each Sebring insert from the windshield edge so both start at the same point.
- Peel a few inches, anchor one end, then press along the strip as the liner comes away.
- Check both Sebring inserts from the front and rear.
A dry, mild day gives the best bond. The Installation tab covers the details.
Reaching safely
Use a stool instead of leaning across the roof; you'll have better control and won't press on the glass.
Afterward
Wait a few days before washing, then mild soap and a soft cloth. Polished 304 is solid steel with no plating, so a light scuff only shows more of the same metal.
Tools
Painter's tape, a tape measure, a residue-free cleaner, and clean lint-free cloths. A helper makes it easier to check that both inserts line up.
What it isn't
It isn't a factory replacement part. It's decorative trim over the existing roof.
Ordering details
Confirm a 2007 to 2010 Sebring sedan. SKU RI47780, UPC 691821487967. Quality Automotive Trims, 877-752-3811.
RI47780 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RI47780 |
| UPC | 691821487967 |
| Part type | Roof Insert Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2010 Chrysler Sebring |
Fitment: RI47780
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler Sebring | 2007-2010 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2010 Chrysler Sebring
- GC47780: 1-piece Gas Door Cover Trim
- LP47780: 1-piece License Plate Bezel
- RD47780: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Roof Insert Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RI47780 Roof Insert Trim
Which Sebring does RI47780 fit?
The Chrysler Sebring 4-door sedan, 2007 through 2010.
How many pieces?
Two.
How wide are they?
No width is listed. Call 877-752-3811 for a measurement.
Is there a trunk accent?
Yes, RD47780, listed at 1.125 inches.
How do they attach?
3M tape over the existing surface.
