Product Description
Chevrolet Camaro 2010-2015 Coupe and Convertible Side Accent Trim, 6-Piece Stainless (AT50100)
The 2010-2015 Chevrolet Camaro has a long, muscular body side with a strong shoulder line, and a narrow stripe of polished steel along it makes the car look even lower and longer. QAA's AT50100 is a six-piece body side molding accent for that Camaro, cut at 0.75" wide in polished stainless steel. It is listed for both 2-door body styles, the coupe and the convertible, across six model years.
Coupe or convertible, same kit
QAA catalogs AT50100 for the 2-door Camaro coupe and the 2-door Camaro convertible. That is helpful, because some trim for this car is restricted to one body or one model. The full window trim package WP50100, for example, is listed for the coupe only, and the front grille accent SG50100 is listed for the SS model only. This side accent carries neither restriction in the catalog.
Six pieces, three-quarters of an inch
The accent is split into six pieces that QAA shaped for the Camaro's body. The catalog does not say where each segment goes, so the product photos are your best reference for the layout. At 0.75", it reads clearly on a car this size, yet stays slim beside the Camaro's own lines.
Material
Every piece is made in the USA from 26-gauge 304 stainless steel, polished to a mirror shine. Because it is solid stainless, the shine is the metal itself. Grade 304 is a mainstream stainless for exterior trim, and 26 gauge refers to the sheet thickness QAA starts with.
Install
QAA pre-applies 3M automotive-grade acrylic foam tape to each piece, and the kit installs directly over the existing surface. You do not drill, and no factory trim comes off. QAA states the tape will hold for a lifetime without causing any damage to the car. On a convertible, it is worth installing with the top up so the body panels are in their normal position. Clean and dry the mounting line, test-fit, then press each piece down firmly. The Installation tab has the full process.
Building a Camaro look
QAA lists a lot of Camaro trim for these years. Some highlights:
- SV50100, a six-piece side vent trim in a "Shark Fin" style.
- Two "SS" emblem sets, one 3" tall and one 2" tall.
- A two-piece pillar post trim, a gas door cover, a window sill set, a roof insert, and a body molding insert kit.
- Window trim packages, including WP50100 for the coupe.
The side vent trim and this accent sit close together on the body side, so look at both sets of photos to plan the look. Each part is linked in the Fitment tab.
Years
Listed for 2010, 2011, 2012, 2013, 2014, and 2015, coupe and convertible. The Fitment tab shows the row exactly as QAA catalogs it, with both body styles named.
Questions
Call Quality Automotive Trims at 877-752-3811 with your model year and body style, and mention AT50100. The UPC is in the Specs tab. Keep AT50100 to hand when you phone.
AT50100 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | AT50100 |
| UPC | 691821361267 |
| Part type | Body Side Molding Accent Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.75" |
| Mounting | 3M automotive-grade acrylic foam tape (pre-applied); installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2015 Chevrolet Camaro |
Fitment: AT50100
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Camaro | 2010-2015 | 2-door, Coupe, Convertible |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010-2015 Chevrolet Camaro
- GC50100: 1-piece Gas Door Cover Trim
- PP50100: 2-piece Pillar Post Trim
- SV50100: 6-piece Side Vent Trim
- SGR50100: 4-piece "SS" Emblem
- SGR50101: 4-piece "SS" Emblem
- SG50100: 1-piece Front Grille Accent Trim
- WP50100: 8-piece Window Trim Package
- WP50102: 6-piece Window Trim Package
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Side Molding Accent Trim
- Unpack all 6 pieces and match each one to its position on the vehicle before removing any tape liner.
- Clean and dry the mounting surface so the 3M automotive-grade acrylic foam tape bonds to paint or trim, not dirt or wax.
- Peel the liner, align the piece, and press it firmly into place directly over the existing surface.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: AT50100 Body Side Molding Accent Trim
Which Camaro does AT50100 fit?
The 2010 to 2015 Chevrolet Camaro, 2-door coupe and convertible.
Is it only for the SS?
No. The catalog lists no model restriction for this kit. The SS-only restriction applies to the SG50100 grille accent.
How many pieces and how wide?
Six pieces, 0.75" wide.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
How does it attach?
Pre-applied 3M acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without damaging the paint.
Who do I call with questions?
Quality Automotive Trims, 877-752-3811.
