Product Description
TR53390 Ford Fusion 2013-2016 Sedan Stainless Tail Light Ring Accent Trim, 4 Pieces
For the 2013-2016 Ford Fusion 4-door sedan, TR53390 is a four-piece Tail Light Ring Accent Trim in polished stainless steel. The listing gives no width or placement note beyond the part name. The four pieces are listed for the 2013-2016 Fusion sedan.
Four pieces to place
The record doesn't say how the four pieces divide between the lights or where each one sits. When the box arrives, lay them out and compare each with the photos to find its spot before cleaning. If any piece can't be placed, call 877-752-3811.
The linked license bar
QAA links LB53390 for this sedan, a one-piece License Bar, Above plate accent Trim, noted "Under the logo". If you plan to order it, call so you know how the rear will look together.
Construction
The four Fusion tail light accents are cut by QAA in the USA from polished 26 gauge 304 stainless steel, and they install over the existing surface with 3M automotive-grade acrylic foam tape. QAA states that tape will hold for a lifetime without harming the Ford.
Preparation
- Wash around the tail lights
- Rinse and dry fully
- Wax-and-grease remover on each bonding area
- Isopropyl alcohol right before each piece goes on
With four contact areas, clean each one just before its piece, rather than all at the start.
Dry fit and numbering
Hold each piece up with its liner on, check it sits flat, and write its position on the liner. Mark the edges with small strips of painter's tape so each piece has a target.
Bonding
Work one piece at a time. Peel the liner, align before contact, set it down without sliding, and press firmly over its whole surface. Complete one lamp, then stand back and compare before starting the next.
Conditions
Mild and dry, out of direct sun. Wait a day before washing.
Care
Clean the Fusion accents with mild soap and a soft cloth, use a non-abrasive stainless cleaner on fingerprints, and skip scouring pads.
Tools
Painter's tape, a marker, lint-free cloths, wax-and-grease remover and isopropyl alcohol. A helper behind the car can confirm the finished lamps match.
If a piece won't settle
Try it in another position in case pieces have been swapped. If it still doesn't sit where the photos show, keep the liner on and call us with your year and a photo.
Before ordering
Confirm a 2013 to 2016 Fusion sedan with tail lights matching the photos. If the lights have been replaced, call first. Count all four pieces on arrival, store them flat, and press down any raised edge the morning after fitting.
Comparing the lamps
Rings show any offset clearly. After the first lamp is finished, hold the remaining pieces in place and look at both lights together from directly behind the car. Adjust until the spacing matches, mark the positions, and only then peel the liners.
Allow about an hour for all four pieces, and keep the box until they're on.
TR53390 covers four Fusion tail light pieces and carries UPC 691821534838. Call 877-752-3811 for help.
TR53390 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TR53390 |
| UPC | 691821534838 |
| Part type | Tail Light Ring Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2016 Ford Fusion |
Fitment: TR53390
| Vehicle | Years | Body style |
|---|---|---|
| Ford Fusion | 2013-2016 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2013-2016 Ford Fusion
- LB53390: 1-piece License Bar, Above plate accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Tail Light Ring Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TR53390 Tail Light Ring Accent Trim
Which car does TR53390 fit?
The 2013-2016 Ford Fusion 4-door sedan.
How many pieces?
Four.
Where does each go?
Positions aren't listed. Check the photos or call 877-752-3811.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
