Product Description
TP53360 Ford Escape 2013-2019 Stainless Trunk Hatch Accent Trim, 0.675", Top Trim Crease, 1 Piece
For the 2013-2019 Ford Escape 4-door SUV, TP53360 is a one-piece Trunk Hatch Accent Trim in polished stainless steel. The bullet reads "0.675" Width, with Top Trim Crease".
A slim strip with a crease
At 0.675", this is a narrow accent. The note says it comes "with Top Trim Crease". The record doesn't describe the crease further or how it meets the hatch, so check the photos to see the finished look before ordering.
A big group of Escape parts
The record links many QAA parts for this SUV, including:
- RD53360: Rear Deck Accent, 1 piece, 1.5"
- GC53360: Gas Door Cover Trim, "With notch for finger grip contour"
- TH53360: Rocker Panel Trim, Insert Kit, 8 pieces, 1.25", side molding
- WS53360: Window Sill Trim Set, 10 pieces, 0.625"
- DH53360 and WQ53360: door handle and wheel well sets
- Eight Pillar Post Trim sets, PP53360 to PP53367, split by keyless entry touch pad and piece count
The pillar sets differ on whether they include a keyless entry touch pad, so read each one's note carefully before ordering one alongside this trim.
Construction
The creased 0.675" Escape accent is polished 26 gauge 304 stainless steel produced in the USA, applied to the existing liftgate with 3M automotive-grade acrylic foam tape. Per QAA, the tape will hold for a lifetime without harming the 2013-2019 Ford.
Preparation
Wash, rinse and dry the hatch. A narrow strip has a small bonding area, so clean it thoroughly: wax-and-grease remover, then isopropyl alcohol just before fitting.
Keeping a thin line straight
Any wobble shows on a 0.675" strip. During the dry fit, hold the piece with its liner on and sight along it from each end. Mark both ends with painter's tape, and run a strip of tape along the line as a guide if it helps.
Bonding
- Peel a short length of liner from one end.
- Set that end on its mark.
- Work along, peeling and pressing.
- Press the Escape trim firmly from end to end to finish.
Conditions
Mild and dry, out of direct sun. No washing for a day.
Care
Mild soap and a soft cloth for the Escape; a non-abrasive stainless cleaner for fingerprints.
Before ordering
Confirm an Escape from 2013 to 2019 and compare the photos with your hatch. Check the piece on arrival, store it flat, and press down any raised spot the next morning.
Tools
Painter's tape, lint-free cloths, wax-and-grease remover and isopropyl alcohol. A helper standing behind the SUV can tell you whether the strip looks level, which is hard to judge close up on a narrow piece.
If it won't sit right
Should the strip not follow the hatch as the photos show, stop with the liner on and call us with your year and a description. Keep the box until the trim has been on for a day.
Allow around half an hour for the whole job.
Escape trunk trim TP53360 carries UPC 691821679744; call Quality Automotive Trims at 877-752-3811.
TP53360 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TP53360 |
| UPC | 691821679744 |
| Part type | Trunk Hatch Accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.675" |
| Coverage / notes | With Top Trim Crease |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2019 Ford Escape |
Fitment: TP53360
| Vehicle | Years | Body style |
|---|---|---|
| Ford Escape | 2013-2019 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2013-2019 Ford Escape
- DH53360: 4-piece Door Handle Accent Trim
- GC53360: 1-piece Gas Door Cover Trim
- PP53360: 4-piece Pillar Post Trim
- PP53361: 6-piece Pillar Post Trim
- PP53362: 8-piece Pillar Post Trim
- PP53363: 10-piece Pillar Post Trim
- PP53364: 4-piece Pillar Post Trim
- PP53365: 6-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Trunk Hatch Accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TP53360 Trunk Hatch Accent Trim
Which SUV does TP53360 fit?
The 2013-2019 Ford Escape 4-door SUV.
How wide is it?
0.675", with a top trim crease.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
How many pieces?
One.
