Product Description
Ford F-150 2018-2020 Solid Stainless Tailgate Accent Trim TP58399, 4", No Cutout, 1 Piece
TP58399 is a one-piece polished stainless steel Tailgate Accent Trim for the 2018-2020 Ford F-150 pickup truck, listed for 2-door and 4-door bodies. The bullets read "4" Width" and "solid, no cutout".
Solid versus cutout
This piece is solid, with no opening. The record links TP58308, a two-piece 4" Tailgate Accent Trim "W/F150 cutout" for the same truck. So the choice is one solid piece or two pieces with a cutout. The record doesn't describe what the cutout version leaves visible, so compare the photos of both with your tailgate before deciding.
Other tailgate trims linked
- RT58308: 1 piece, 4", "With logo NEW Eco cut out"
- RT58310: 2 pieces, 8", "With logo NEW Eco cut out"
- RT58311: 2 pieces, 8", "No Eco logo cut out"
- SGR58308: "F-150" Tailgate Letter Inserts, 5 pieces
The record doesn't say whether any of them are meant to be used with this solid piece. Please check with us before ordering more than one tailgate trim. Note that the SGR58308 record also carries a "CHEVROLET" Bed Rail Letter Insert note, which doesn't fit its F-150 name.
Wheel well links
WZ58308 (four-piece Wheel Well Fender Trim Molding, "No Factory Flares") and WQ58308 (twelve-piece Wheel Well Accent Trim, not for models with factory fender flares, mud flaps removed and reinstalled) complete the linked group.
Construction
The solid 4" F-150 piece is cut by QAA in the USA from polished 26 gauge 304 stainless steel and installed over the existing surface with 3M automotive-grade acrylic foam tape. Per QAA, the tape will hold for a lifetime without harming the truck.
Measuring
Compare the photos with your tailgate and measure the area where the trim sits against the 4" width. Check along the full length so you know the surface stays even.
Preparation
Wash, rinse and dry the tailgate. Use a wax-and-grease remover on the bonding area, then isopropyl alcohol just before fitting.
Fitting a single long piece
Dry fit with the liner on and sight along the trim from each end. Mark both ends with painter's tape. A helper holding the far end keeps it straight. Lower and raise the tailgate to check clearance. Then peel a short length of liner at one end, set it on its mark, and work across, pressing as you go. Finish with firm pressure end to end.
Conditions
Mild, dry weather in shade. Wait a day before washing.
Care
Wash the solid F-150 accent with mild soap and a soft cloth; use a non-abrasive stainless cleaner for fingerprints.
Before ordering
Confirm a 2018 to 2020 F-150 and decide whether you want the solid look or the cutout set. If the tailgate has been replaced, call first. Check the piece on arrival, store it flat, and press down any raised edge the next morning.
Tools
A rigid ruler, painter's tape, lint-free cloths, wax-and-grease remover and isopropyl alcohol. Allow about an hour.
Keep the box until the trim has been on for a day.
Ask for TP58399, UPC 840251605681, when you want the 4-inch F-150 trunk accent; 877-752-3811 is our line.
TP58399 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TP58399 |
| UPC | 840251605681 |
| Part type | Tailgate Accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4" |
| Coverage / notes | Solid, no cutout |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2018-2020 Ford F-150 |
Fitment: TP58399
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-150 | 2018-2020 | 2-door, 4-door, Pickup Truck |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2018-2020 Ford F-150
- RT58308: 1-piece Tailgate Accent Trim
- RT58310: 2-piece Tailgate Accent Trim
- RT58311: 2-piece Tailgate Accent Trim
- TP58308: 2-piece Tailgate Accent Trim
- SGR58308: 5-piece "F-150" Tailgate Letter Inserts
- WZ58308: 4-piece Wheel Well Fender Trim Molding
- WQ58308: 12-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Tailgate Accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TP58399 Tailgate Accent Trim
Which truck does TP58399 fit?
The 2018-2020 Ford F-150 pickup truck, 2-door & 4-door.
Does it have a cutout?
No, it's solid. TP58308 is the version with the F150 cutout.
How wide is it?
4".
How many pieces?
One.
