Product Description
TP28281 Honda Accord 2008-2010 Sedan Stainless Trunk Accent Trim, 2 Pieces
For the 2008-2010 Honda Accord 4-door sedan, TP28281 is a two-piece Trunk Hatch Accent Trim in polished stainless steel. The record has no width or position note, so placement comes from the photos.
Sedan only
The fitment names only the 4-door sedan. No coupe row is listed for this trim.
The linked parts
Two other QAA parts are linked in the record:
- SG28281: Front Grille Accent Trim, 2 pieces, tagged for the 4-door sedan
- PP28251: Pillar Post Trim, 2 pieces, tagged for the 2-door coupe
The pillar post set carries a coupe tag, not a sedan one, so it isn't listed for the car this trunk trim fits. If you're building a set for a sedan, check that part's fitment closely, or call 877-752-3811.
Material
Cut in the USA from polished 26 gauge 304 stainless steel, the two 2008-2010 Accord trunk pieces press onto the existing lid with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without damaging the Honda sedan.
Placement
The record doesn't describe where on the trunk the pieces sit. Look at the photos next to your Accord's trunk, then dry fit each piece with the liner on when the box arrives.
Cleaning the trunk
Wash, rinse and dry the trunk lid thoroughly. Remove wax from the bonding areas with a wax-and-grease remover, and wipe with isopropyl alcohol just before fitting. Keep fingers off the cleaned surface.
Dry fit
Hold both pieces in position and check they sit flat. Mark their ends with painter's tape. Step back to make sure they look level, and open and close the trunk to check clearance.
Bonding
- Peel a few inches of liner.
- Line the piece up with your marks.
- Press that section down.
- Keep peeling and pressing to the end.
- Finish with firm pressure over the whole piece.
Weather
Fit on a mild, dry day out of direct sun. Don't wash the car for a day.
Aftercare
Mild soap, water and a soft cloth keep it bright. A non-abrasive stainless cleaner handles fingerprints.
Tools
Painter's tape, lint-free cloths, wax-and-grease remover and isopropyl alcohol. A helper behind the car helps with the level check.
Before ordering
Confirm a 2008 to 2010 Accord sedan and that the photos match your trunk. If anything looks different, or the trunk lid has been replaced, call us first. Count both pieces on arrival and keep the box until the job is done.
If the dry fit doesn't look right
Swap the two pieces first, in case they're reversed. If neither follows the trunk as the photos show, leave the liners on and call us with your year and a description of what you see. An unbonded piece is simple to recheck. Store both flat in the box until fitting day.
Next morning
Look over both pieces and press down any edge that has lifted. Then the job is done.
2008-2010 Accord trunk pair TP28281 (UPC 691821254118): phone Quality Automotive Trims at 877-752-3811.
TP28281 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TP28281 |
| UPC | 691821254118 |
| Part type | Trunk Hatch Accent Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2008-2010 Honda Accord |
Fitment: TP28281
| Vehicle | Years | Body style |
|---|---|---|
| Honda Accord | 2008-2010 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2008-2010 Honda Accord
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Trunk Hatch Accent Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TP28281 Trunk Hatch Accent Trim
Which Accord does TP28281 fit?
The 2008-2010 Honda Accord 4-door sedan.
Does it fit the coupe?
Only the sedan is listed.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
How many pieces?
Two.
