Product Description
Honda Pilot 2016-2022 Stainless Steel Trunk Hatch Accent Trim TP16260, 2 Pieces
TP16260 is a two-piece polished stainless steel Trunk Hatch Accent Trim for the 2016-2022 Honda Pilot 4-door SUV. The listing gives no width or placement note beyond the part name, so the photos are the guide to where the two pieces sit on the hatch. The two-piece accent is listed for the 4-door Pilot SUV from 2016 through 2022, and the group also links pillar kits for the same years.
Material
- Pilot accent: high-quality polished 304 stainless, 26 gauge
- Pilot accent pieces made in America by QAA
- Installs over the existing surface of the hatch
- Both pieces bond with 3M automotive-grade acrylic foam tape
According to QAA, the 3M foam tape securing the two Pilot pieces will hold for a lifetime without causing any damage to the SUV's surface. Check the box contents on arrival.
The rest of the Pilot range
QAA links a long list of parts for this SUV in the record, among them:
- RD16260: Rear Deck Accent, 1 piece, 0.75"
- LB16260: License Plate Bar Accent, 1 piece, 0.75"
- LP16260: License Plate Bezel, 1 piece, with access for the rear backup camera
- GC16260: Gas Door Cover Trim, 1 piece
- TH16260: Rocker Panel Trim, Lower Kit, 4 pieces, 1.25"
- WQ16260: Wheel Well Accent Trim, 6 pieces, 1.5"
- PP16260 to PP16263: Pillar Post Trim in 4, 6, 8 and 10 piece sets
Several of those also sit on the rear of the SUV. If you plan to order more than one rear piece, call so you know how they relate before ordering.
Placement
The record doesn't describe where on the hatch the two pieces go. Study the photos, then hold each piece against your Pilot's hatch with the liner on. If they don't match the surface you see, call 877-752-3811 before going further.
Preparing the hatch
Wash the hatch, rinse, and dry it completely. Clean the bonding areas with a wax-and-grease remover, then wipe them with isopropyl alcohol just before fitting. Don't touch the cleaned surface afterward.
Dry fit and marking
With the hatch closed, hold each piece in place and check that it sits flat along its length. Mark both ends with painter's tape. Open and close the hatch to make sure nothing interferes.
Bonding
- Peel back a short length of liner.
- Set the piece against the marks you made.
- Press that section, then keep peeling and pressing along the piece.
- Go over the whole piece with firm pressure.
Weather
Fit in mild, dry weather out of direct sun. Leave the hatch unwashed for a day.
Care
Wash the Pilot accents with mild soap and a soft cloth. To clear fingerprints, use a non-abrasive stainless cleaner.
Checklist
A Pilot from 2016 to 2022, the photos matching your hatch, a clean dry surface and a mild day. Count both pieces when the box arrives, and keep the packaging until the job is done.
A helper standing back from the SUV can tell you whether the two pieces look level with each other before you press them down.
Store both pieces flat until fitting day.
Honda Pilot accent TP16260 is listed under UPC 691821644513; 877-752-3811 reaches our team.
TP16260 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TP16260 |
| UPC | 691821644513 |
| Part type | Trunk Hatch Accent Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2016-2022 Honda Pilot |
Fitment: TP16260
| Vehicle | Years | Body style |
|---|---|---|
| Honda Pilot | 2016-2022 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2016-2022 Honda Pilot
- PP16260: 4-piece Pillar Post Trim
- PP16261: 6-piece Pillar Post Trim
- PP16262: 8-piece Pillar Post Trim
- PP16263: 10-piece Pillar Post Trim
- TH16260: 4-piece Rocker Panel Trim, Lower Kit
- RD16260: 1-piece Rear Deck Accent
- LP16260: 1-piece License Plate Bezel
- GC16260: 1-piece Gas Door Cover Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Trunk Hatch Accent Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TP16260 Trunk Hatch Accent Trim
Which SUV does TP16260 fit?
The 2016-2022 Honda Pilot 4-door SUV.
Where does it go?
On the trunk hatch; the photos show placement. Call 877-752-3811 with questions.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
How many pieces?
Two.
