Product Description
Fusion, MKZ, Zephyr & Milan Stainless Wheel Well Accent Trim WQ46632, Wide Kit, Full Length
WQ46632 is the Wide Kit, Full Length set of four polished stainless steel wheel well accents for the Ford Fusion 2006-2009, Lincoln MKZ 2006-2012, Lincoln Zephyr 2006 and Mercury Milan 2006-2009, all 4-door sedans. The note says "Wide Kit, Full Length, will not work with QAA PART # TH46630", and the listing also says "With 3M adhesive installation and black rubber gasket edging".
Not for use with TH46630
This is the key point. If your car has, or will get, QAA part TH46630, this set is listed as not working with it. In that case look at WQ46630 (Wide Kit) or WQ46631 (Narrow), both cut short to accommodate TH46630. If you aren't fitting TH46630, WQ46632 is the wide set without the cut.
Wide versus narrow
WQ46633 is the Narrow, Full Length partner, and it has no gasket edging. This Wide Kit does carry black rubber gasket edging. Neither width is given in figures; the photos show the difference.
Check your model and year
Four models share this set, each with its own years: Fusion and Milan 2006-2009, MKZ 2006-2012, Zephyr 2006 only. The title gives all four with those years. Phone 877-752-3811 if your car isn't clearly covered.
Material
The Fusion, MKZ, Zephyr and Milan wide kit is polished 26 gauge 304 stainless steel made in the USA, adhered over the existing surface with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without damage to the car.
Getting the openings ready
Begin a day early if you can: wash the sedan, then let it stand dry overnight. Next morning, go around each arch with a torch and inspect the band the wide pieces will cover. You're looking for wax residue, glue left by anything removed, stone chips and dust in the lip. Lift residue with a plastic edge, polish out wax, and treat chips. Finish each band with wax-and-grease remover, then isopropyl alcohol immediately before its piece.
Bonding the Full Length pieces
Present each piece in turn, liner on, with painter's tape at each end, and press the gasket gently against the opening to confirm it follows the curve. Look at both ends against the photos. Then release the liner a hand-width at a time from the front end and press the stainless home behind it. Fit both front corners before the rears.
Care
Confirm four pieces arrived. Give the fitted Fusion-family trim a day before washing, then mild soap and a soft cloth, and keep any pressure washer off the gasket. Questions: call 877-752-3811.
Before ordering
Ask yourself one question first: is TH46630 on the car, or going on? If yes, WQ46632 is not listed for it; choose a cut-short set instead. If no, confirm your model and year against the fitment line and decide between the Wide Kit with gasket edging here and the narrow bare-edged WQ46633. When the parcel arrives, inspect each gasket edge and keep the liners on until each piece has been held to its arch.
2006-2009 Fusion wheel well kit WQ46632, UPC 691821337620. If the Fusion fit is in doubt, 877-752-3811 reaches us.
WQ46632 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | WQ46632 |
| UPC | 691821337620 |
| Part type | Wheel Well Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Wide Kit, Full Length, will not work with QAA PART # TH46630 |
| Edging | Black rubber gasket edging |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2009 Ford Fusion, 2006-2012 Lincoln MKZ, 2006 Lincoln Zephyr and 2006-2009 Mercury Milan |
Fitment: WQ46632
| Vehicle | Years | Body style |
|---|---|---|
| Ford Fusion | 2006-2009 | 4-door, Sedan |
| Lincoln MKZ | 2006-2012 | 4-door, Sedan |
| Lincoln Zephyr | 2006 | 4-door, Sedan |
| Mercury Milan | 2006-2009 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Ford Fusion
- WQ46630: 4-piece Wheel Well Accent Trim
- WQ46631: 4-piece Wheel Well Accent Trim
- WQ46633: 4-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Wheel Well Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Seat the black rubber gasket edging evenly along the wheel opening as you press the trim on.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: WQ46632 Wheel Well Accent Trim
Will WQ46632 work with TH46630?
No. The note says it "will not work with QAA PART # TH46630".
Does it have gasket edging?
Yes, black rubber gasket edging.
Which cars?
Fusion 2006-2009, MKZ 2006-2012, Zephyr 2006 & Milan 2006-2009, 4-door sedans.
Is there a narrow version?
Yes, WQ46633, with no gasket edging.
