Product Description
Chrysler Sebring Convertible 1997-1998 Stainless Door Sill Trim, 2 Pieces, 2.5" x 34" (DS37780)
DS37780 puts polished stainless on the sills of the Chrysler Sebring convertible from 1997 and 1998. The set has two plates, each listed at 2.5" wide and 34" long, made in the USA from 304 stainless steel at 26 gauge.
Size you can check
The catalog gives both dimensions: 2.5" width and 34" length. Before ordering, measure the flat top of your sill from end to end and across. If your measurements comfortably fit those numbers, the plates should sit well. If you're unsure, call with your measurements and we'll talk it over.
Fitment
One row: Chrysler Sebring, 1997-1998, 2-door Convertible. Two model years, convertible only. If your Sebring is a different body style, this listing isn't for it. The Fitment tab shows the row.
Part number note
The title and SKU both give DS37780, the two-piece sill set for the Sebring convertible. If you're matching a number from an older order, call to confirm.
What the sill trim does
The sill is the threshold at the bottom of each door opening. A sill trim plate covers that surface with a polished finish, one per door on a two-door car.
Steel and mounting
The Sebring convertible's two sill plates are 26 gauge, polished 304 stainless. They go straight onto the existing sill with 3M automotive-grade acrylic foam tape, so the 1997-1998 Chrysler needs no drilling, and QAA states the tape will hold for a lifetime without damage to the car's surface.
Paint check
On a car from the late nineties, the sill paint has seen plenty of shoes. Check it closely for flaking, chips or bare spots, because the tape bonds to the paint and needs it to be solid.
Install steps
Vacuum the sills, then wash, rinse and degrease. Do a second degreasing pass where dressing or wax has built up. Dry completely. Open the door, hold a plate in place with the liner on, and center it along the 34" run. Mark both ends with painter's tape. Peel the liner, line up with the marks, and press firmly the whole way along, then again a minute later. Repeat with the second plate and compare. See the Installation tab for full prep.
Why dress the sills
Each time a door swings open, the sill is the first surface at your feet and the one passengers step across. A polished plate makes that opening look finished and cared for. It lies flat on the threshold, so the doors close exactly as they did before.
Before ordering
Confirm the car is a 1997-1998 Sebring convertible, measure the sill against 2.5" by 34", look at the photos, and check the paint. Each of those takes only a minute and saves a return trip to the phone later.
Afterward
Keep feet off the Sebring's plates until the next day. Fit them on a mild, dry day, and keep the top up overnight if rain might fall.
Care
Mild soap, water and a soft towel. No abrasive pads.
Questions
For the Sebring sill trim, phone Quality Automotive Trims at 877-752-3811 and name DS37780; the UPC is under Specs.
DS37780 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | DS37780 |
| UPC | 691821466078 |
| Part type | Door Sill trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 2.5" |
| Coverage / notes | 34" Length |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1997-1998 Chrysler Sebring |
Fitment: DS37780
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler Sebring | 1997-1998 | 2-door, Convertible |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Door Sill trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: DS37780 Door Sill trim
What does DS37780 fit?
The 1997-1998 Chrysler Sebring 2-door convertible.
What size are the plates?
2.5" wide and 34" long, per the catalog.
How many pieces?
Two door sill trims.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
