Product Description
Volkswagen Jetta Sedan 2005-2010 Stainless Front Bumper Accent, 16 Pieces, 1.625" Wide (FP25665)
Sixteen pieces is a lot for a bumper accent, and that's what sets FP25665 apart. This polished stainless set for the Volkswagen Jetta 4-door sedan, 2005 through 2010, is listed at 1.625" wide and made in the USA from 304 stainless steel at 26 gauge.
Why sixteen?
The catalog doesn't explain how the sixteen pieces are arranged on the bumper. It gives a width of 1.625" and no lengths. The product photos are the place to see the full layout. Before you install, lay out every piece next to those photos and number them with painter's tape. If you can't match a piece to a spot, call us rather than guessing.
Fitment
Volkswagen Jetta, 2005-2010, 4-door Sedan. One row. The Fitment tab shows it.
Jetta trim on this sheet
- LP25665, license plate bezel, 8.17.
- PP25665, four-piece pillar post trim, tagged sedan and wagon; PP25666, six-piece, sedan.
- RD25665, rear deck accent at 1.75, and RD25666, above-plate rear deck accent with logo at 1.35.
- TH25665, eight-piece lower rocker kit spanning from the bottom of the door up, at 1.875.
- WQ25665, four-piece wheel well accent.
WQ25666 and WS25665 are listed as well, with details on their own pages. The two rear deck accents differ in width and placement, so compare them before choosing.
Material and tape
Polished 304 stainless at 26 gauge. Every piece installs directly over the existing surface with 3M automotive-grade acrylic foam tape, with no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Bumper prep
Wash the bumper and rinse well. Degrease every area where a piece will sit, repeating until a clean cloth comes away clean; bugs and road film are common at the front. Remove any spray wax. Check for chips. Dry fully.
A system for sixteen
Work from the center of the bumper outward, following the photos, so the spacing stays even. Dry-fit each piece with the liner on and mark its edges with painter's tape. Peel, align, press firmly, then press again after a minute. Every few pieces, step back in front of the car and check the overall look before continuing. Plan on an unhurried session. The Installation tab has full prep details.
Why a full set
A multi-piece accent can trace more of the Jetta bumper's lines than a single strip, brightening the front while the bumper stays unchanged.
Before ordering
Confirm a 2005-2010 Jetta sedan, study the photos to understand the sixteen-piece layout, and check the bumper surface for chips or peeling. If trunk lid, rocker or wheel well trim is planned too, compare those listings now so front and rear match. Each installs on its own, so you can space the work out.
Conditions
Pick a mild, dry day out of direct sun, and keep the car dry overnight afterward.
Care
Mild soap and a soft cloth.
Questions
For the sixteen-piece Jetta set, phone 877-752-3811 and mention FP25665. The sixteen-piece Jetta bumper set has its UPC in Specs.
FP25665 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | FP25665 |
| UPC | 691821469253 |
| Part type | Front Bumper Trim |
| Pieces in kit | 16 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.625" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2005-2010 Volkswagen Jetta |
Fitment: FP25665
| Vehicle | Years | Body style |
|---|---|---|
| Volkswagen Jetta | 2005-2010 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2005-2010 Volkswagen Jetta
- LP25665: 1-piece License Plate Bezel
- PP25665: 4-piece Pillar Post Trim
- PP25666: 6-piece Pillar Post Trim
- RD25665: 1-piece Rear Deck Accent
- RD25666: 1-piece Rear Deck Accent
- TH25665: 8-piece Rocker Panel Trim, Lower Kit
- WQ25665: 4-piece Wheel Well Accent Trim
- WQ25666: 8-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Front Bumper Trim
- Unpack all 16 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: FP25665 Front Bumper Trim
What does FP25665 fit?
The 2005-2010 Volkswagen Jetta 4-door sedan.
How many pieces?
Sixteen front bumper accent pieces.
How wide are they?
The catalog lists 1.625" width.
Where does each piece go?
The catalog does not describe the layout. Check the photos or call 877-752-3811.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
