Product Description
Volkswagen Jetta Sedan 2005-2010 Stainless License Plate Bezel, 8.17" (LP25665)
LP25665 is a polished stainless License Plate Bezel listed for the Volkswagen Jetta 4-door sedan, model years 2005 through 2010. That's six years on one row, sedan only, no trim exclusions. The bezel is a single piece of 26-gauge 304 stainless steel, made in the USA and mirror polished, and the listing gives one measurement: 8.17" Width.
Reading the measurement
The catalog doesn't say which dimension that 8.17" refers to, so treat it as a reference rather than a test you can run with a tape measure on the car. The product photos show the actual outline. Compare them with the plate area on your Jetta, including any lock, emblem or lighting nearby, and if you'd like the width explained, call Quality Automotive Trims at 877-752-3811 and ask about LP25665. We've flagged the missing label for review.
Three parts at the back of the car
The Jetta sheet has two other one-piece parts cataloged for the rear, and they're worth sorting out before you order. RD25665 is a Rear Deck Accent at 1.75". RD25666 is also a Rear Deck Accent, at 1.35", but its note says Above License Plate, with Logo. That places it close to this bezel, so if you're considering both, view their photos together to make sure they work as a pair, or call to ask. The catalog doesn't spell out how RD25665 and RD25666 differ beyond those notes and widths.
Mounting
The bezel uses 3M automotive-grade acrylic foam tape and installs directly over the existing surface, so no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Inspect the paint around the plate first and repair chips or lifting clear coat. Remove the plate, wash, rinse and dry the area, and wipe with rubbing alcohol. Dry-fit with the liner on, check from behind that it's centered, and mark it with painter's tape. Peel the liner, press firmly around the frame, then once more. The Installation tab gives the temperature range.
Other Jetta parts
FP25665 is a sixteen-piece front bumper trim at 1.625". TH25665 is an eight-piece lower rocker kit at 1.875" that spans from the bottom of the door up to that width. PP25665 is a four-piece pillar post kit whose row reads Sedan, Wagon, which doesn't match this sedan-only sheet, so we've flagged it; PP25666 is a six-piece kit tagged sedan only. WQ25665 is a four-piece wheel well accent set. WQ25666 and WS25665 are cross-listed by number only. Check each listing for its finish.
Of everything listed, the bezel is the simplest to fit: one piece, one location, nothing to line up but the frame. That makes it a sensible way to try polished stainless on your Jetta first.
Before you order
Check that your Jetta sedan's year is between 2005 and 2010. If you keep a frame on the plate, refit it during the dry fit to confirm it clears the bezel. For care, mild soap, water and a soft towel.
LP25665 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP25665 |
| UPC | 691821482788 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 8.17" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2005-2010 Volkswagen Jetta |
Fitment: LP25665
| Vehicle | Years | Body style |
|---|---|---|
| Volkswagen Jetta | 2005-2010 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2005-2010 Volkswagen Jetta
- FP25665: 16-piece Front Bumper Trim
- PP25665: 4-piece Pillar Post Trim
- PP25666: 6-piece Pillar Post Trim
- RD25665: 1-piece Rear Deck Accent
- RD25666: 1-piece Rear Deck Accent
- TH25665: 8-piece Rocker Panel Trim, Lower Kit
- WQ25665: 4-piece Wheel Well Accent Trim
- WQ25666: 8-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP25665 License Plate Bezel
Which Jetta does LP25665 fit?
The 2005-2010 Volkswagen Jetta 4-door sedan.
What does the 8.17" width measure?
The catalog doesn't say which dimension it is. See the photos or call 877-752-3811.
Can I use it with RD25666?
RD25666 is noted Above License Plate, with Logo. Compare both sets of photos or call before ordering both.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
