Product Description
Volkswagen Passat 2006-2010 Stainless License Plate Bezel, No Screw Holes (LP26675)
LP26675 carries a single, short note in the catalog: No screw holes. It's a one-piece polished stainless License Plate Bezel for the Volkswagen Passat 4-door sedan, model years 2006 through 2010, and that note is the detail most worth understanding before you order.
What "No screw holes" means, and doesn't
The catalog doesn't expand on the phrase. Taken literally, it says the bezel has no screw holes, which fits with how it mounts: by tape, not hardware. What the note doesn't tell us is how the bezel relates to the screws that hold your plate, whether it sits around them or the plate must clear it some other way. We won't guess. Look closely at the product photos to see the outline, compare them with the plate area and screw positions on your Passat, and if it's unclear, call Quality Automotive Trims at 877-752-3811 and ask about LP26675 specifically.
Material and mounting
The bezel is 26-gauge 304 stainless steel, mirror polished and made in the USA. It mounts with 3M automotive-grade acrylic foam tape and installs directly over the existing surface, so there's no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. No dimensions are listed.
Installation
Begin with the paint. On a car from these years, check the plate area for chips, lifting clear coat and leftover adhesive, and fix them first; the tape holds only as well as the surface beneath it. Remove the plate, wash, rinse and dry, and wipe with rubbing alcohol. Hold the bezel in place with the liner on and loosely refit the plate to see how it sits with the bezel and the screws before anything is stuck down. When it looks right, mark the position with painter's tape, take the plate back off, peel the liner and press the bezel firmly around its whole frame, twice. The temperature range is on the Installation tab.
Passat parts on the same sheet
This sheet reaches well beyond the plate. EP26675 is a thirteen-piece Engine Trim Package. SG26675 is an eight-piece front grille accent set described as a 1.125" Width Insert Package. ML26675 is a four-piece Accent Trim for the Front Marker Lights, and HL26675 a two-piece head light accent trim. At the rear, RD26675 is a one-piece Rear Deck Accent at 1.8", so compare its photos with this bezel's if you're considering both. PP26675 and PP26676 are pillar post kits of four and six pieces. Check each listing for its finish.
Because the bezel is one piece in one spot, it's the quickest job on this list, and seeing it on the car helps you decide how far to take the rest.
Before ordering
Your records should name a Passat sedan from 2006 to 2010. If you run a plate frame, include it in the dry fit too, so you know it won't overlap the bezel.
For care, mild soap and water with a soft towel keeps the polish clear; leave abrasive pads out.
LP26675 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP26675 |
| UPC | 641606029608 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | No screw holes |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2010 Volkswagen Passat |
Fitment: LP26675
| Vehicle | Years | Body style |
|---|---|---|
| Volkswagen Passat | 2006-2010 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2010 Volkswagen Passat
- EP26675: 13-piece Engine Trim Package
- HL26675: 2-piece Head Light Accent Trim
- ML26675: 4-piece Accent Trim
- PP26675: 4-piece Pillar Post Trim
- PP26676: 6-piece Pillar Post Trim
- RD26675: 1-piece Rear Deck Accent
- SG26675: 8-piece Front Grille Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP26675 License Plate Bezel
What does "No screw holes" mean on LP26675?
The catalog doesn't explain it beyond the phrase. Check the photos against your plate screws or call 877-752-3811.
Which Passat does it fit?
The 2006-2010 Volkswagen Passat 4-door sedan.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Are dimensions listed?
No. Use the photos.
How many pieces?
One.
