Product Description
Hyundai Sonata 2006-2010 Polished Stainless License Plate Bezel (LP26360)
LP26360 puts a polished stainless outline around the plate area of the Hyundai Sonata 4-door sedan. The fitment row lists model years 2006 through 2010, five in all, with no trim exclusions and no other body style. It's a single piece of 26-gauge 304 stainless steel, made in the USA and mirror polished.
Three things to settle before you buy
First, the year. Look at your records; a Sonata sedan from 2006 to 2010 is what this listing covers.
Second, the outline. The catalog gives no dimensions and no cutout notes for this bezel, so the product photos are the reference. Compare them with the area around your plate, especially any lock, emblem or lighting close by.
Third, the surface. The newest cars on this row are from 2010, and the tape that holds the bezel bonds to the paint's top layer. Take a close look at the plate area. Chips need touching up, and clear coat that's lifting or flaking should be repaired rather than covered. If any of these three leaves you unsure, call Quality Automotive Trims at 877-752-3811 and mention LP26360.
Fitting the bezel
The Sonata bezel fixes directly over the existing surface with 3M automotive-grade acrylic foam tape. There's no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Remove the plate and clear away any old adhesive with a plastic scraper. Wash with soapy water, rinse, dry completely and finish with a rubbing alcohol wipe. Hold the bezel in place with its liner on and look from behind the car to make sure it's level and centered. Mark it with painter's tape, peel the liner, set it against the marks and press firmly around the frame. Press again after a minute. The Installation tab lists the temperature range.
Sonata parts with widths
MI26360 is a four-piece body molding insert kit at 1.5". TH26360 is a two-piece rocker trim at 1.25" that Installs below the door. WP26360 is a twelve-piece Window Trim Package that Includes Upper Trim and Pillar Posts, NO Window Sills, while PP26360 and PP26361 are separate pillar post kits with four and six pieces; since the package already includes pillars, check the photos before pairing them. GC26360 is a one-piece gas door cover trim, and RD26360 a one-piece Rear Deck Accent, the other part cataloged for the back of the car. WP26362 and WQ26360 are cross-listed by number only. Check each listing for its finish.
Of all these, the bezel is the quickest to fit, and it's the one cataloged specifically for the plate area. Fitting it first lets you judge polished stainless on your Sonata before anything larger.
Plate frames and cleaning
If you keep a frame on the plate, put it back on during the dry fit to make sure it doesn't overlap the bezel. Clean the polished face with mild soap and water, dry with a soft towel, and avoid scouring pads.
LP26360 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP26360 |
| UPC | 691821695379 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2010 Hyundai Sonata |
Fitment: LP26360
| Vehicle | Years | Body style |
|---|---|---|
| Hyundai Sonata | 2006-2010 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2010 Hyundai Sonata
- GC26360: 1-piece Gas Door Cover Trim
- MI26360: 4-piece Body Molding Insert Trim Kit
- PP26360: 4-piece Pillar Post Trim
- PP26361: 6-piece Pillar Post Trim
- RD26360: 1-piece Rear Deck Accent
- TH26360: 2-piece Rocker Panel Trim, On the rocker
- WP26360: 12-piece Window Trim Package
- WP26362: 6-piece Window Trim Package
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP26360 License Plate Bezel
Which Sonata does LP26360 fit?
The 2006-2010 Hyundai Sonata 4-door sedan.
Do I need to drill?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Are dimensions listed?
No. Use the photos or call 877-752-3811.
Does WP26360 include window sills?
No. It includes upper trim and pillar posts only.
How many pieces is the bezel?
One.
