Product Description
Hyundai Sonata 2006-2010 Stainless Molding Insert Kit, 1.5" (MI26360)
What does MI26360 fit on a 2006 to 2010 Sonata? A polished stainless line on the existing body side moldings, in four pieces, each 1.5 inches wide. The single fitment row is tagged 4-door sedan, and the title carries the same years. Follow the Installation tab when getting the Sonata's moldings ready.
What's it made of?
Polished 304 stainless steel at 26 gauge, made in the USA. The linked parts below have their own pages, and each page gives that part's material, so check them individually if you're planning a matched set.
How does it go on?
With 3M automotive-grade acrylic foam tape, directly over the existing surface. There's no drilling, no hardware and nothing to remove. Sonata fitting questions are answered at 877-752-3811. The record also doesn't map where each of the four strips sits; the photos show the layout.
Will it fit my Sonata?
If your car is a 4-door Sonata from 2006, 2007, 2008, 2009 or 2010, it's on the row. MI26360 is listed for 2006 to 2010 Sonatas only. Before ordering, look at your moldings: they should be intact, without cracks or loose sections, and their shape should match the photos. If anything looks different, call Quality Automotive Trims at 877-752-3811.
What else is listed for this sedan?
- GC26360, a 1-piece Gas Door Cover Trim
- LP26360, a 1-piece License Plate Bezel
- PP26360 and PP26361, Pillar Post Trim in 4 and 6 pieces
- RD26360, a 1-piece Rear Deck Accent
- TH26360, a 2-piece Rocker Panel Trim, On the rocker at 1.25 inches, which installs below the door
- WP26360 is the 12-piece Window Trim Package: upper trim and pillar posts, without window sills
WP26362 and WQ26360 are linked as well. Each one is sold separately. If you're pairing the molding inserts with the rocker trim, note the two have different listed widths, 1.5 inches here and 1.25 inches on TH26360.
How do I install it?
Start by cleaning the moldings with soap and water, then dry and wipe with rubbing alcohol. Sort the four strips against the photos and label the liners with their positions.
Dry-fit each strip with the liner on, aligning it with the molding edges, and mark both ends with painter's tape. Peel the liner, set the strip on the marks and press firmly along its whole length. Work one strip at a time and step back to check the line after each.
The Installation tab lists the temperature range for the tape and the full steps. Choose a dry, mild day and keep the car out of rain and the first wash until the bond settles.
Anything to watch on an older car?
The newest Sonata on this row is a 2010, so look closely at the moldings' condition. Tape bonds best to a sound, clean surface, so repair or replace any damaged sections before you start.
How do I keep it shiny?
Mild soap, water and a soft cloth. Skip abrasive pads and steel wool.
Questions about MI26360? Call 877-752-3811.
MI26360 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | MI26360 |
| UPC | 691821512980 |
| Part type | Body Molding Insert Trim Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.5" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2010 Hyundai Sonata |
Fitment: MI26360
| Vehicle | Years | Body style |
|---|---|---|
| Hyundai Sonata | 2006-2010 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2010 Hyundai Sonata
- GC26360: 1-piece Gas Door Cover Trim
- LP26360: 1-piece License Plate Bezel
- PP26360: 4-piece Pillar Post Trim
- PP26361: 6-piece Pillar Post Trim
- RD26360: 1-piece Rear Deck Accent
- TH26360: 2-piece Rocker Panel Trim, On the rocker
- WP26360: 12-piece Window Trim Package
- WP26362: 6-piece Window Trim Package
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Molding Insert Trim Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: MI26360 Body Molding Insert Trim Kit
Which vehicle does MI26360 fit?
The Hyundai Sonata 4-door sedan, 2006 through 2010.
How wide are the strips?
1.5 inches.
How many pieces?
Four.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
How does it mount?
With 3M automotive-grade acrylic foam tape, directly over the existing surface, no drilling.
