Product Description
Stainless Molding Insert Kit with Crease Contour for the 2006-2011 Hyundai Accent Sedan (MI27365)
The one detail that sets MI27365 apart is a short note in its record: "with crease contour." This four-piece kit of polished 304 stainless strips is listed for the Hyundai Accent 4-door sedan from 2006 through 2011, and each strip is 1.25 inches wide. The crease note tells you the strips are shaped rather than flat, so the job before ordering is to compare that shape against the body side moldings on your own Accent.
What "crease contour" means for you
The catalog doesn't describe the crease beyond those words, and it doesn't say where along the strip it falls. That's why the product photos matter more here than on a flat insert kit. Compare the pictures with your own car in good light. If your moldings have a ridge or fold running along them, check that it sits where the strip's crease would sit. If your Accent's moldings look different from the photos, or you can't tell, call Quality Automotive Trims at 877-752-3811 and give the SKU before you buy.
The basics from the listing
Material is 26 gauge 304 stainless steel with a polished finish, made in the USA. Mounting is 3M automotive-grade acrylic foam tape, and the strips go directly over the existing surface, so no drilling is needed. The record also doesn't say which strip belongs on which door, so lay them out by the photos and mark each liner before you start.
Fitting a shaped strip
Shaped strips reward a slow dry fit. Clean each molding with soap and water, dry it, then wipe it with rubbing alcohol and let it flash off. Hold the first strip in place with its liner still on and slide it until the crease settles into the molding's profile without rocking. Mark both ends with painter's tape. Then peel the liner, lay the strip on your marks and press down its full length, working carefully on both sides of the crease. Repeat for the other three, and step back after each one to check the line from a few feet away.
A dry, mild day is best; the Installation tab lists the tape's temperature range.
Other Accent sedan parts on this sheet
Twelve more parts are linked to the same Accent sedan tag. The sheet names a 1-piece gas door cover trim (GC27365), a 1-piece license plate bezel (LP27365), and a 1-piece license bar (LB27365) noted with key access and a logo cut out. There are three pillar post sets, PP27365, PP27366 and PP27367, at 4, 6 and 8 pieces. RD27365 is a 1-piece rear deck accent, noted with a top crease, at 1.5 inches. TH27365, WP27365, WP27366, WQ27365 and WS27365 are cross-listed by number only, and their details aren't on this sheet, so check each listing on its own page.
Care
Wash polished stainless with mild soap and a soft cloth, and keep abrasive pads and steel wool away from it. Questions about MI27365 or the crease shape? Call 877-752-3811.
MI27365 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | MI27365 |
| UPC | 691821533206 |
| Part type | Body Molding Insert Trim Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.25" |
| Coverage / notes | With crease contour |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2011 Hyundai Accent |
Fitment: MI27365
| Vehicle | Years | Body style |
|---|---|---|
| Hyundai Accent | 2006-2011 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2011 Hyundai Accent
- GC27365: 1-piece Gas Door Cover Trim
- LB27365: 1-piece License Bar, Above plate accent Trim
- LP27365: 1-piece License Plate Bezel
- PP27365: 4-piece Pillar Post Trim
- PP27366: 6-piece Pillar Post Trim
- PP27367: 8-piece Pillar Post Trim
- RD27365: 1-piece Rear Deck Accent
- TH27365: 2-piece Rocker Panel Trim, On the rocker
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Molding Insert Trim Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: MI27365 Body Molding Insert Trim Kit
What vehicle is MI27365 listed for?
The Hyundai Accent 4-door sedan, 2006 through 2011.
What does "with crease contour" mean?
The catalog notes the strips have a crease contour but doesn't describe it further. Compare the photos with your moldings, or call 877-752-3811.
How wide is each strip and how many are there?
Four strips, each 1.25 inches wide.
Will I need to drill?
No. The kit mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
